Jump to content
SAU Community

Recommended Posts

I've just fitted the Willall cat-back Titanium exhaust system in conjunction with the Cobb Accessport flash using the Willall map for 98+ RON fuel. Initially, I considered the Akrapovic system but the value, the "home-grown" support and the performance offered by Willall swayed me in their direction. After a minor glitch with a scratched Cobb screen I got to drive the end result yesterday after having my Nissan dealer fit the exhaust. I've owned tuned EVO's and Porsches, ridden Superbikes for years and driven open-wheelers at track days. None have managed to combine the noise, handling and shocking acceleration of the GTR with ca. 630+ bhp. I bought the Cobb Accessport with TCM but haven't given it the 3,300 rpm launch so wait out for more feedback.

Link to comment
https://www.sau.com.au/forums/topic/355169-r35-performance-tuning-willall/
Share on other sites

I've just fitted the Willall cat-back Titanium exhaust system in conjunction with the Cobb Accessport flash using the Willall map for 98+ RON fuel. Initially, I considered the Akrapovic system but the value, the "home-grown" support and the performance offered by Willall swayed me in their direction. After a minor glitch with a scratched Cobb screen I got to drive the end result yesterday after having my Nissan dealer fit the exhaust. I've owned tuned EVO's and Porsches, ridden Superbikes for years and driven open-wheelers at track days. None have managed to combine the noise, handling and shocking acceleration of the GTR with ca. 630+ bhp. I bought the Cobb Accessport with TCM but haven't given it the 3,300 rpm launch so wait out for more feedback.

What Willall tune did you get? The Stage III 98 RON one?

  • 1 month later...

I think these cars all vary a bit but I had Cobb with Willall custom tune

and just a midpipe ages ago and gained almost 25% power at the wheels.

Its hard to work out flywheel horsepower exactly but this claim does sound

quite realistic.

I have not had a chance to go in Keirs R35 since he put the new "built"

engine and turbos on it, but with over 500 awkw that makes it approx

80% increase over std power!

Totally amazing cars. And they can hook up the power which makes them all the

more impressive.

I am sure they are plenty of commodores and falcons cruising around with

500kw at the wheels these days, but whats the point if you can't put it down?

  • 1 month later...
  • 3 weeks later...

And the result is............. the 2011 model made 313 rwkw standard and jumped to 361rwkw

with the Willall midpipe and COBB tune. Thats a 15% increase!

Car feels amazing to drive now, much more mid range torque, and the power feels more linear.

Haven't had time to get up in the hills yet, but from what i have experienced so far - Amazing difference.

  • 7 months later...
  • 3 months later...

Hi Guys, I'm sure this has been covered but I could not find - what stock power is an MY09/10 R35 GTR at the wheels, before and after Mid-pipe and Stage 1 COBB tune (98RON)???

Roughly...

Cheers,

Ed

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
    • Neg, the top one is actually for the front. The sizes are 18x10.5 +18 and 18x11 +32.   I measured many times but I'm sure I'll have problems as this is the thread for problems.
    • Just one thing; tapping tapered threads is tricky. Taps are always tapered and you would generally run it as far as you can, but with a tapered thread you have to stop much sooner otherwise the wide part of the taper will run in too far and you will have to thread the sensor in too far too as well (possible that it will never make a good seal) BTW nice wide wheels, I guess the top one is for the back!
    • Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity. Edit: 11kg each (or 10.9/11.1 depending on what my scale decides over multiple tests, the 18x11 don't seem to weigh noticeably any more than 10.5)  
×
×
  • Create New...