Jump to content
SAU Community

Recommended Posts

Hi,

My KYB gas shocks on the rear of my R33 GTS-t lasted 12 months/25000km, and I need to replace them. The workshop is suggesting another pair of KYBs.

I don't know exactly which type of KYB I have, but they're not adjustable.

I only use the car for day to day street use.

Should I consider a different type of KYB, or a different make entirely? I'm willing to pay more for something which will last longer on what seems to be increasingly poor Sydney roads.

Thanks,

Greg.

Hi, Greg

There are few shocks discussion topics lately, so you might want to have a look..Bilstien seems good for some people.

Thanks. Yes, I have been reading some of the other posts, and Bilstein certainly does seem to have a good reputation here. (I nearly posted my question in one of the other recent threads, but I didn't notice any discussion about reliability, so I decided to start a new thread)

Greg.

out of interest, how can you kill a set of shocks in 12 months of road use :confused:  you sure you want to use em again?

I honestly don't know how I did it, except as I say, Sydney's roads really are *bad*.

Both times it has been the left rear which has gone. (the original shocks were almost certainly the stock Nissan shocks, though, whatever they are)

Greg.

I was going to say why not reco them b4 i heard that your shocks were under the warranty...........

www.shockreco.com.au they reco just about every aftermarket shockie that you can think of all back to their factory specs.

thats the only place that i could find who would reco hks hypermax II back to their factory specs. .............

::Bang::

::::::::::

I was going to say why not reco them b4 i heard that your shocks were under the warranty...........

www.shockreco.com.au they reco just about every aftermarket shockie that you can think of all back to their factory specs.

thats the only place that i could find who would reco hks hypermax II back to their factory specs.                              .............              

                                                   ::Bang::  

                                                   ::::::::::

Thanks - that looks useful.

I've had the shock replaced now (at no cost), but as it turns out, it probably wasn't the cause of the symptoms I was noticing. (a very easily audible creaking sound) The reason they replaced the shock is that the return travel was a bit slow, but they don't think that was causing the creaking. The creaking was apparently caused by two things: a) the rubber spacer/bushing (for the top of the shock mount?) had been installed upside down, and B) the "top mounts" needed lubricating. (seems unlikely to me that two things would have gone wrong at the same time, but that's what they told me)

Greg.

Btw, it could be psychological, but the car does feel somewhat better (smoother ride).

The workshop where I took the car first did take the shock apart and lube it, so perhaps this masked the extent of the wear a bit - perhaps I'm lucky the KYB

guy even noticed the slightly bad return travel at all.

Greg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...