Jump to content
SAU Community

Recommended Posts

Hey guys quick question, i know this topic has been covered a thousand times and believe me when i say iv been researching for hours!

But im still having some trouble :/

Well today i changed my spark pugs for the 1st time since i bought the car (Recently purchased 3 weeks ago). It had PFR5G-11 in there and i changed to copper plugs BCPR6ES .8mm gap.

Anyway went for a drive and on boost it missfires from 3.5 to 5 thousands revs (a popping noise from the exhaust)

The car is running on 15psi with a highflow turbo and splitfire coilpacks. Didnt have any problems with the previous plugs, so i checked what the PFR5G's were gapped but wasn't sure because every plug had a different gap size :blink:

I read in someones post that :-

- weak coilpacks require a smaller gap so that there can be spark, but itsn't so good for performance (but can eliminate misfire)

- coilpacks with a strong punch can utilise a spark plug with a larger gap (due to being able to create a bigger spark over a larger distance) and can increase torque"

My question is that if thats true what gap size should i be running??

Any help would be much appreciated

Link to comment
https://www.sau.com.au/forums/topic/355444-missfire-question/
Share on other sites

Um I'm pretty sure the bcpr6es are not copper plugs not 100% but I am pretty sure the bkr plugs were copper plugs I currently run the bkr6e ones in my car they are copper v plugs and I have not had issues with them I tried running the bcpr6es plugs and I had flats spots and miss fires as you described I dunno y but my car did not like them

Um I'm pretty sure the bcpr6es are not copper plugs not 100% but I am pretty sure the bkr plugs were copper plugs I currently run the bkr6e ones in my car they are copper v plugs and I have not had issues with them I tried running the bcpr6es plugs and I had flats spots and miss fires as you described I dunno y but my car did not like them

hmm what gap size, boost and coilpacks are u running? from what iv heard the bkr6e plugs are abit shorter in length to the bcpr6e.

hey mate the BCPR6ES .8mm gap plugs you have are ok. i run them and countless others. if they are missing at .8 then the problem likely isnt them. but maybe the coils are weak and the previous plugs were gapped lower therefore didnt missfire. you could try gap to .7 and see if its better. the difference between .8 - .7 at 15psi is probably minimal but if it fixes your miss then you could try it out 4 a while. have you read the DIY about insulating the coilpacks to prevent missfire?

http://www.skylinesaustralia.com/forums/topic/119403-how-to-fix-missfire-problem/page__hl__coilpack

Edited by t_revz

hey mate the BCPR6ES .8mm gap plugs you have are ok. i run them and countless others. if they are missing at .8 then the problem likely isnt them. but maybe the coils are weak and the previous plugs were gapped lower therefore didnt missfire. you could try gap to .7 and see if its better. the difference between .8 - .7 at 15psi is probably minimal but if it fixes your miss then you could try it out 4 a while. have you read the DIY about insulating the coilpacks to prevent missfire?

http://www.skylinesa...e__hl__coilpack

I thought that having splitfires i didnt have to insulate them, but worth a try i guess.

Thanks for the help mate, much appreciated :thumbsup:

hey mate the BCPR6ES .8mm gap plugs you have are ok. i run them and countless others. if they are missing at .8 then the problem likely isnt them. but maybe the coils are weak and the previous plugs were gapped lower therefore didnt missfire. you could try gap to .7 and see if its better. the difference between .8 - .7 at 15psi is probably minimal but if it fixes your miss then you could try it out 4 a while. have you read the DIY about insulating the coilpacks to prevent missfire?

http://www.skylinesa...e__hl__coilpack

hey man i siliconed the coil packs and re gaped the plugs to .7mm and shes all good now :D

hey man i siliconed the coil packs and re gaped the plugs to .7mm and shes all good now :D

good to hear its ok now, next time you change em id run them back at .8 as i would imagine it was more the silicone that fixed it. if increasing the gap brings the prob back then likely a coil but you could keep running .7 til it gets worse or you up the boost and have to sort it out.

Trev :thumbsup:

  • Like 1

I had a missfire issue after 4500rpm+ with BCPR6ES .8mm. I bought BKR7E .8mm with the 'V groove' and now running perfect.

Running Splitfires too..

Your the second person who said that...thanks il keep that in mind next time i change the plugs :thumbsup:

  • 4 weeks later...

He says that because of the host of issues that come with adding extra boost and assuming the ecu can happily deal with it. It you changed your ecu and had a tune, your power and fuel economy would both increase, possibly dramatically.

Bcpr6es and bkr6es are both copper plugs.

If insulating helps then your splitfires may need replacing in the future. I'd go with yellow jackets, they're a lot cheaper and come with a 2 year warranty.

Is 6 the right heat rating for 15psi? I'd have a good look into that, esp if as you said two people have moved from 6 to 7 with v groove and found an improvement.

There is a mighty long thread on spark plugs worth a read, here

http://www.skylinesaustralia.com/forums/topic/104405-spark-plugs/

Edited by Galois

He says that because of the host of issues that come with adding extra boost and assuming the ecu can happily deal with it. It you changed your ecu and had a tune, your power and fuel economy would both increase, possibly dramatically.

Bcpr6es and bkr6es are both copper plugs.

If insulating helps then your splitfires may need replacing in the future. I'd go with yellow jackets, they're a lot cheaper and come with a 2 year warranty.

Is 6 the right heat rating for 15psi? I'd have a good look into that, esp if as you said two people have moved from 6 to 7 with v groove and found an improvement.

There is a mighty long thread on spark plugs worth a read, here

http://www.skylinesa...05-spark-plugs/

Well today i changed my plugs to bcpr6e the v grooved with .8mm standard gap plug( got them for free off a friend so thought il give them a try), and i had no missfire. I guess insulating the coilpacks solved my missfire.( when i insulated my coilpacks i also gapped the plugs to .7mm at the same time, not knowing if the gap size or the insulation solved the issue) Would i still need to replace my coilpacks? if so how long can run it as is now?

I know that 15psi is really pushing the standard ecu, thats why im planning to drop to 10 or 12psi but i need a another actuator because the one i have doesn't run under 15psi.

Edited by Levy

How long will the current coilpacks last? Completely unpredictable I'm afraid. If the insulation has helped fix it it might be just an issue with the plastic casing, instead of the coils deteriorating themselves, which is a good sign. It might run fine for a month, it might run for 10 years or more, hopefully closer to the latter :D

How long will the current coilpacks last? Completely unpredictable I'm afraid. If the insulation has helped fix it it might be just an issue with the plastic casing, instead of the coils deteriorating themselves, which is a good sign. It might run fine for a month, it might run for 10 years or more, hopefully closer to the latter :D

Yeh hope so...thanks for your input mate :cheers:

Hi Guy`s i have Stagea S2 neo,iI have been PLAYING with coilpack`s since owning my Stagea dec 06 i have tryed few way`s & am still trying different way now have 3 set`s iam doing different,as yet i have found CRC RED URETHANE SEAL COAT which is used for motor winding,this is by far the best way i have try so far,all so look`s good,post-36964-1239969970_thumb.jpg post-36964-1239970199_thumb.jpgpost-36964-1239970677_thumb.jpg,I will post up some more as i PLAY with different way`s.cheer`s chuckie.

I had a missfire issue after 4500rpm+ with BCPR6ES .8mm. I bought BKR7E .8mm with the 'V groove' and now running perfect.

Running Splitfires too..

You do realise you change the HEAT RANGE of the plug and that was more likely to have solved your issue than the "groove".

Hi Guy`s i have Stagea S2 neo,iI have been PLAYING with coilpack`s since owning my Stagea dec 06 i have tryed few way`s & am still trying different way now have 3 set`s iam doing different,as yet i have found CRC RED URETHANE SEAL COAT which is used for motor winding,this is by far the best way i have try so far,all so look`s good,post-36964-1239969970_thumb.jpg post-36964-1239970199_thumb.jpgpost-36964-1239970677_thumb.jpg,I will post up some more as i PLAY with different way`s.cheer`s chuckie.

i like the that idea chuckie let us know how u go :thumbsup:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...