Jump to content
SAU Community

Recommended Posts

Hey guys, I have been trying to find out from a couple of places about the Ganador Aero mirrors for my R34 GTT and i found a person who will supply these Ganador-style Aero mirrors for a price that beats everyone in the market..

post-60999-0-69553700-1299500885_thumb.jpg

post-60999-0-59813500-1299500903_thumb.jpg

The base plates are made of high quality aluminium, and the body of the mirrors in high quality fibre glass. Electric motors are included, and they are a direct bolt on replacement for the stock mirrors. Warranty is included.

Im sourcing these mirrors from Streettotrack[http://www.streettotrack.com/], where they are getting it made from www.nvdautosport.com .. These mirrors will fit an R34 GTT[2 door] and GTR... The price for these mirrors are as follows:-

Price for 7+ sets = $330.00 per set delivered to each individual customer

Price for 10 + sets = $288 per set delivered to each individual customer.

$330 per set

1.

2.

3.

4.

5.

6.

7.

$288 per set

8.

9.

10.

The Group buy will run for 1 month from 7th march to 7th april or whichever is lesser to reach 10 people..

These dont fold back but move the mirror around like the stock mirror, I know these are not original but they come with warranty and i have been told that they have a very good finish to it..

  • 4 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...