Jump to content
SAU Community

Recommended Posts

Do u mean straight through pipe 'thru' the cat, IE the cat has nothing in it?

The main effect is a $10k fine from the EPA, and a couple of extra rwkw

Having said that I just put a lovely straight thru side exit pipe on my gtr and it sounds *mean*.  Not to mention some hge flamage :)

Link to comment
https://www.sau.com.au/forums/topic/35706-no-cat/#findComment-712760
Share on other sites

yeah, straight pipe instead of cat, then out the bottom of the passenger door, 3" straight thru. Not the thing for a street car tho :)

But seriously DVS33T, its a big risk to take, just run NOS instead if you want some easy power.

Link to comment
https://www.sau.com.au/forums/topic/35706-no-cat/#findComment-712765
Share on other sites

hi, ive just been personally witnessing the effects of cat removal. It results in noticeable increase in spool time and the engine feels free-er (this is even after using a highflow cat). The amount of rwkw gained depends mainly on the amount of exhaust flow. If your nearly stock then it wont make much more power, but if your running up around 1.2 bar then you could see up to 10rwkw with tuning. It wont damage the engine. If you have a tuned aftermarket ecu it shouldnt flame or pop either. This is seen more with the stock ecus that run rich. Striaght thru pipe is simply a pipe with flanges on it that bolts in place of the cat, making a fully straight thru system.

Link to comment
https://www.sau.com.au/forums/topic/35706-no-cat/#findComment-712769
Share on other sites

How exacly do you get your cat taken out?

Will exhaust places, like CES do it?

Seeing its illegal?

It would only be for track.. ofcourse

And seriously, how often do you, or you hear of someone getting pulled over and cops checking to see if you/they have a cat or not?

Link to comment
https://www.sau.com.au/forums/topic/35706-no-cat/#findComment-712773
Share on other sites

Heya Duncan,

That sounds awesme, have you got any pics of this? have you much trouble with the cops yet? was any panel changes have to be made to get the exhaust out the side, something i have always wanted to have done buty just don't have the nads to do it.... WA cops aren't too friendly either... pics please so i can drool!

Link to comment
https://www.sau.com.au/forums/topic/35706-no-cat/#findComment-712920
Share on other sites

Like I said its a race car not a road car so the cops seem ok with it :) No body changes so it is a little low (hangs 3" below the chasis rail)

Seriously tho, why run without a cat on the road. If you did get caught I think that fine would hurt.

As for side exit pipe on a road car theres a thread here: http://www.skylinesaustralia.com/forums/sh...light=side+pipe

Link to comment
https://www.sau.com.au/forums/topic/35706-no-cat/#findComment-713016
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
    • Probably. I take it that they are also mentioned to be for R34 Skyline? For example.... RDA has that part as RDA7957. I have the dimpled and slotted version of that on my car https://www.ebay.com.au/itm/285518478694?srsltid=AfmBOopKxMuAFpsxZJdB1cam4D5RAj1f9yJyOttPZLAwXVNCOiwlhrIy This is DBA's top one piece equivalent https://www.ebay.com.au/itm/364246686631?srsltid=AfmBOorbb0XHQgqTvZLgQPhg70nqJtGvdojKnugum3O2LFSr2h-obp8D  
    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
×
×
  • Create New...