Jump to content
SAU Community

Recommended Posts

spotted ya again brad :) thursday morning. i was actually in my liner this time...not a beetle or on foot

Thought that was you. Waved but was a little late lol. Were you in the beetle the other morning, think friday? (All days all the same at the moment lol)

just wondering were would be a good place to get my 25 rebuilt with forged internals for say up to around 600 HP, i have asked this question before but didn't really get to much of an answer, also, what kind of price range would i be looking at?

just wondering were would be a good place to get my 25 rebuilt with forged internals for say up to around 600 HP, i have asked this question before but didn't really get to much of an answer, also, what kind of price range would i be looking at?

no idea to be honest buddy. a rebuild is not on my mind yet......well hopefully :whistling:

but i hear Dan down at ERD does some mighty fine work

Good turnout last night ;)

what happened last night?? sry Ive been drunk and merry since bout midday Friday....far too much booze

so. i got a call from option one today. the coil overs are in. but they cant fit them till next Tuesday. so i think im gonna do it myself, can anyone recommend somewhere local to get the alignment done that will do a good job and knows skyrines??

*i normally go to Caboolture steering, who always does a good job, but im not sure hes used to setting up coilovers and the likes (regarding height ect)

what happened last night?? sry Ive been drunk and merry since bout midday Friday....far too much booze

so. i got a call from option one today. the coil overs are in. but they cant fit them till next Tuesday. so i think im gonna do it myself, can anyone recommend somewhere local to get the alignment done that will do a good job and knows skyrines??

*i normally go to Caboolture steering, who always does a good job, but im not sure hes used to setting up coilovers and the likes (regarding height ect)

What ones did you get from there? I was looking there myself.

Plus you NEED to get them installed before Sunday!!!

I can t wait lol

what happened last night?? sry Ive been drunk and merry since bout midday Friday....far too much booze

so. i got a call from option one today. the coil overs are in. but they cant fit them till next Tuesday. so i think im gonna do it myself, can anyone recommend somewhere local to get the alignment done that will do a good job and knows skyrines??

*i normally go to Caboolture steering, who always does a good job, but im not sure hes used to setting up coilovers and the likes (regarding height ect)

Peter can do them at RPM. What type of coilovers do you have man? With pete's racing history and street knowledge I'm sure he'll get it sorted dude.

does anyone go to harry's anymore?

Not really only for lunch every now and again, Too many wankers that attract police attention.

what happened last night?? sry Ive been drunk and merry since bout midday Friday....far too much booze

so. i got a call from option one today. the coil overs are in. but they cant fit them till next Tuesday. so i think im gonna do it myself, can anyone recommend somewhere local to get the alignment done that will do a good job and knows skyrines??

*i normally go to Caboolture steering, who always does a good job, but im not sure hes used to setting up coilovers and the likes (regarding height ect)

A few of the boys were at my place looking at stereo gear and such.

Grats on coilovers

Peter can do them at RPM. What type of coilovers do you have man? With pete's racing history and street knowledge I'm sure he'll get it sorted dude.

+1 for peter at RPM

Peter can do them at RPM. What type of coilovers do you have man? With pete's racing history and street knowledge I'm sure he'll get it sorted dude.

same as what clint got in his 34. some BC V1's the nice soft girly street ones :P

read up on it today.....they seem very easy to fit. three bolts per corner and a trolley jack.

RPM is only round the corner from me. so getting there for the alignment wont be too hard at all. only issue is i need it done this week as i want them in and sorted for happy laps. i'll def be having a late night tomorrow to install them. and hope pete has some time for me this week, will cal him tomorrow.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...