Jump to content
SAU Community

Recommended Posts

Third, but I wouldn't have the torque to get it moving in third unless I rode the crap out of the clutch. Your torque converter helps a lot with that. So that's probably close to what mine will run.

Third, but I wouldn't have the torque to get it moving in third unless I rode the crap out of the clutch. Your torque converter helps a lot with that. So that's probably close to what mine will run.

Yer kinda, it's only a standard stall ATM (and its really bad putting that much load on it as u can ballon it lol) so it literally wasn't even off the converter forever so it was just a pathetically slow half track followed by it weirdly starting to pull hard from half track. Would of looked messed up from outside, weird sounding skyline that only has one gear lol

Indeed very interesting. Join us!

I did last years drag day, my first and only so far. my car was dead stock other than a cat back exhaust, no mad weight reduction. best I got was a 14.3

Now that I've done the usual cheap bolt on mods I'd be very interested to see the difference.

Launching is key to a good run, especially in a stock car.

I'll see if i can find my time slip :)

post-62717-0-37470900-1368655184_thumb.jpg

This drag day is getting more and more interesting. May have to show my face..

Show, do eeeet :)

Ill be there weather I have my car or not.... I can always post a time slip later on

yeah mate ill be there running around the track. Ill be there with the Mercury Motorsport Team. Probably wont enter any events except for the cruising. Got a pitpass which will be good. More than welcome to come for a spin

yeah mate ill be there running around the track. Ill be there with the Mercury Motorsport Team. Probably wont enter any events except for the cruising. Got a pitpass which will be good. More than welcome to come for a spin

Yours isn't the white r33 with the Lmgt1/2s on it that was roliling around at power cruise last year?

Ah ok man they shouldn't be to hard to find, just look for the yellow bloody 34 making all the noise/flames lol. But yer that'd be sick ill see how the day progresses its been over a year now since I was on track at a powerplay/cruise type event there. Was good fun lol (was also in a boaty old xd falcon with all the go and none of the stop/brakes/grip :thumbsup:

Yours isn't the white r33 with the Lmgt1/2s on it that was roliling around at power cruise last year?

Ah ok man they shouldn't be to hard to find, just look for the yellow bloody 34 making all the noise/flames lol. But yer that'd be sick ill see how the day progresses its been over a year now since I was on track at a powerplay/cruise type event there. Was good fun lol (was also in a boaty old xd falcon with all the go and none of the stop/brakes/grip :thumbsup:

No that was my mate with that car, plates were HYPD UP.. Nice car made 450hp at the rears, motor was capable of a lot more though. He has since traded it. This is mine. Was at powercruise last year and powerplay back in FEB.

33JDM2_zps66dc549a.jpg

I'd give u a lift but Im not going and couldn't take u home, but if u spray hairspray on a pen stain before u wash it the stain will be removed easier so you see that's 2 non helpful things but one helpful therefore I beat zeke :P

Oh nice :). I'm in Petrie.

However, unless you change your mind about the lift home, or unless someone else offers me a lift home, I'll have to pass.

For a gobbie I can probably give you a lift home ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes the gear for the R33/34 is different, it is red and has a different number of teeth. My part didn't come with that gear though, so I don't know how many teeth are on the red one. You'd have to reuse the 260RS/R33 gear, as long as it's not destroyed.   Haha, as unfortunate as that might be it was working fine for about the first 1500km I've had the car for now.
    • Update all   thanks to the workshop manual, it lead me back to checking fuses as mentioned central locking and door open lights worked when acc was switched on. diagram attached shows two points of power 1. ACC and 2.  Batt with the later being fused (#28) I did check the fuses using a multimeter but I must have stuffed that up also. Went back and checked the batt fuse in interior fuse box and you wouldn’t believe it… a blown fuse. replaced fuse and everything is now working as it should including the climate control   thank you all with your positive insight and knowledge.    
    • Where is the warning "That this thread is super old"   I just went into a 5 year old thread, went to do a reply, and couldn't see anywhere obvious a warning of it being super old
    • Duncan is correct. Pitwork (and Toyota's own cheap brand "Drive Joy") were primarily created as brands to sell other manufacturers car parts. It would be weird if Nissan sold parts for Toyota vehicles with a Nissan logo on it, so they created Pitwork to sell parts for other brans Toyota, Honda etc. They are not the same as Nissan genuine parts, although they *do* meet Nissan's standards for replacement parts. They aren't supposed to be a substitute for genuine parts, but a cheaper alternative that is better than Ebay fake parts from you-know-where.
    • Thanks GTSBoy, much easier to work with it now it's free!  
×
×
  • Create New...