Jump to content
SAU Community

Recommended Posts

Hi all! Name is Viet, just got an m35 stagea 2weeks ago but its got some minor problems.

My faint engine light keeps appearing even after ressetting the ecu, it comes up with code 0171 which i believe is left bank lean. I notice that my car drinks alot (18l/100km) so im suspecting the o2 sensor which from nissan is $160 with a 2 week wait.

Also notice that on my stock exhaust only the left tip is working, the right is clean.

Does anyone know if the skyline v35 o2 sensor can be used and also if the v35 nav unit will work in my stagea as it was missing from purchased?

Having a hard time of finding basic servicing information as in:

Oil used, how many litres to fill up?

Oil filter part number?

Spark plug number and gapping?

Transmission fluid and capacity?

Diff fluid and capacity?

Also would the arx shocks and springs fit my stagea? Ive got rsr springs atm and i go fishing alot so doesnt clear the dirt roads.

Thanks you advance!

If anyone lives in the western surburbs of melbounre and would like meet up please pm me, would love to learn more about these cars!

4wd fluid and capacity how to bleed?

Link to comment
https://www.sau.com.au/forums/topic/357701-m35-stagea/
Share on other sites

OK, I'll bite. Can't give all the answers but some of them.

Also notice that on my stock exhaust only the left tip is working, the right is clean.

Don't worry, it opens up when you give it a boot full. the exhaust is variable and contains a pressure flap inside.

Does anyone know if the skyline v35 o2 sensor can be used and also if the v35 nav unit will work in my stagea as it was missing from purchased?

1) don't know 2)the Nav function will never work as its Jap only. Buy a UBD. it would be a lot of work to get the shit in there.

Oil used, how many litres to fill up?

4.8 or something like that - most of us are lazy and just dump a 5 litre bottle in.

Oil filter part number?

I can't be assed going downstairs and looking - just ask for something from a 03 350Z you'll get the right one. its fits a shitload of nissan cars.

Spark plug number and gapping?

Different people have had different experiences. Have a search on the site.

Transmission fluid and capacity?

Nissan Matic J, or Nulon 100% sythn seems to be the other proven performer. about 8.5 litres - remember you have to flush it not just drop the Pan, that'll only get about 4 litres.

Diff fluid and capacity?

Redline shockproof - about 1 L per diff I think. Use good quality cause you don't want to change it for a long time...

Also would the arx shocks and springs fit my stagea? Ive got rsr springs atm and i go fishing alot so doesnt clear the dirt roads.

Don't know. should have bought an ARX....:thumbsup: Might be the worlds only Raised Stagea!

4wd fluid and capacity how to bleed?

Nissan Matic D / ????

Hope that helps you to some extent.

I'll let the other guys handle the error message- I have my own thoughts but they are more experienced.

Link to comment
https://www.sau.com.au/forums/topic/357701-m35-stagea/#findComment-5717272
Share on other sites

Also would the arx shocks and springs fit my stagea? Ive got rsr springs atm and i go fishing alot so doesnt clear the dirt roads.

Don't know. should have bought an ARX....:thumbsup: Might be the worlds only Raised Stagea!

The ARX springs will get you a little more lift, I didnt swap my shocks over but I've got ARX springs in; with Nismo springs my front lip was 8cm off the ground.. Looked AWESOME but killed me in terms of functionality. Im now somewhere around 15cm off the ground at the front. So if you need some height and can source the springs, do it thumbsup.gif

Link to comment
https://www.sau.com.au/forums/topic/357701-m35-stagea/#findComment-5717312
Share on other sites

I've got a set of factory ARX springs and shocks in storage if you must go higher. But I recommend lowering of the RS/RX for bitumen and finding a ute for fishing.

I know what you mean about the exhaust tips. I didn't realise until now that the Calsonic has a pressure flap - clever. I just thought mine was always blocked .pinch.gif

Agree with everything PN-Mad mentioned. I replaced my transfer case and Attesa fluids and there is lots of good info on how to do it with the search. Both fairly easy but I needed an extra hand with bleeding the Attesa pump.:thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/357701-m35-stagea/#findComment-5718317
Share on other sites

I've got a set of factory ARX springs and shocks in storage if you must go higher. But I recommend lowering of the RS/RX for bitumen and finding a ute for fishing.

I know what you mean about the exhaust tips. I didn't realise until now that the Calsonic has a pressure flap - clever. I just thought mine was always blocked .pinch.gif

Agree with everything PN-Mad mentioned. I replaced my transfer case and Attesa fluids and there is lots of good info on how to do it with the search. Both fairly easy but I needed an extra hand with bleeding the Attesa pump.:thumbsup:

Hey Gazza,

Did you replace your ARX suspension with BC's ?

How is the ride now?

Link to comment
https://www.sau.com.au/forums/topic/357701-m35-stagea/#findComment-5718423
Share on other sites

Hey Gazza,

Did you replace your ARX suspension with BC's ?

How is the ride now?

Replaced the shocks with Bilsteins and the springs with original-height (ARX) King Springs heavy duty. However, I've recently seen a heap of lowered ARX and they do look better - even with the flared guards. I just find the tailgate doesn't open high enough so at the time decided against lowering.

The ride is firmer but still comfortable. It just suffers now from the factory sway bars but Dale will soon sort this out with the Whitelines.

Link to comment
https://www.sau.com.au/forums/topic/357701-m35-stagea/#findComment-5720916
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
×
×
  • Create New...