Jump to content
SAU Community

Recommended Posts

Omg...you mean cops pick on jap cars...this must be something completely new. Are you saying that if your car doesnt meet state regulations then you can get defected..... WOW

Your whinge has been started about ten years too late.... Make your car legal and you have nothing to worry about

We went for a cruise in the mountains last night, cops watched us drive past, followed us and then just turned around and went back to their spot on the side of the road once they checked our rego's most likely...if you dont do anything wrong you've got nothing to worry about

Well this is going to get us somewhere. Stay tuned ladies and gentlemen, the revolution begins with this rather poorly thought out thread.

And ShyBoi...I love when people like you get defected after years of preaching that if you do the right thing you'll be sweet.

Guest
This topic is now closed to further replies.


  • Latest Posts

    • I did basically the same procedure on a ZF6HP but the reason to pull the valve body is to replace the seals between the valve body and the transmission which are notorious for leaking pressure with age causing poor shifting and burning out the clutches. If you just wanted to exchange all the fluid you should be able to undo one of the transmission cooler return lines to drain into a bucket while using the pressure filler to keep it topped off. 
    • The title should have posted "EFR7670 exhaust housing selection RB26" I can seem to edit thr title on my Android.
    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
×
×
  • Create New...