Jump to content
SAU Community

Recommended Posts

Just bought a house and I may have to look at removing extravagences from the garage for a while.

I am still juggling how to keep it but I'll put it out there anyway.

Car runs immaculately as to be expected by the low k's.

1.1 bar factory boost with safe injector duty levels

2001 Nissan Vspec II GTR

Personal import so still has HID's

Bayside Blue

42 000km’s

Kakimoto Cat back exhaust

Apexi Front pipes

Apexi Catalytic converter

Apexi induction kit

ARC Radiator

18 Volk? Wheels

Carbon Fibre Bonnet (Z tune style)

Carbing Gear knob

Carbon Fibre cooling fin

Cobra after market immobiliser (as well as standard one) Nismo LED Tail lights Odyssey Battery Double Din HDTV/CD/DVD/MP3/GPS Extra programmed key Extra keyless entry (Not yet programmed)

Some spares including:

Autostyle Carbon fibre front lip

Standard Tail lights

Tein Coilovers

Probably look at $65Kish but if you are serious email me as like I said I wouldn't mind if I was stuck with it and basically I can't think of anything for that price I'd prefer if I was buying a car.

Collectable,fast and plain awesome.

I may consider selling the plates also...seperately

[email protected]

post-412-0-22974400-1300788105_thumb.jpg

post-412-0-89716500-1300788136_thumb.jpg

post-412-0-05281800-1300788155_thumb.jpg

post-412-0-94256700-1300788211_thumb.jpg

post-412-0-69936500-1300788238_thumb.jpg

post-412-0-94553200-1300788264_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/358355-34-gtr-vspec-ii-2001/
Share on other sites

  • 2 weeks later...
  • 1 month later...
  • 3 weeks later...
  • 2 months later...
  • 2 weeks later...


  • Similar Content

  • Latest Posts

    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...