Jump to content
SAU Community

Recommended Posts

Up for sale i have the following

Autometer Cobalt Gauges inside a carbon fibre din unit

Consists of Boost 20Psi, Oil Pressure, Water Temp Includes Sensor for Water Temp And Oil Pressure fitting.

In Great condition, I was going to use them in my car but I bought Defi Gauges instead

Price:$300 Posted

Location: Western Sydney

Contact: Via pm or Post here

Extra Info: Pick up is available

Pictures: Attached!!!

2nd item

R33 Driver and Passenger A Pillar Plastics

Consist of the small tweeter grills if you want to mount them in the A Pillar, ive never come accross these so im guessing theyre rare

In Excellent Condition

Prefer these to be picked up

$100

Pictures: Attached

P1000218.jpg

P1000219.jpg

Thanks

Edited by Cro_boy_Mario
  • 4 weeks later...

are you willing to seperate the guages? And if so how much posted to 4740. As im interested in just the water temp.

  • 4 weeks later...

$150 posted for the gauges...last price drop...

$40 for the plastics!

I'm keen on just the Water Temp Gauge... would you accept $50 posted? PM me if you're keen to move it ASAP!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The powder coating came in at $250 EACH. The TRX rims got a coat of clearcoat on the outside only.    
    • Bit wet, but YUMMY
    • Keeping in mind that I am currently getting flat 10 L/100km on my RB25DET, which means >>500km/tank. I would test this car for vacuum leaks, check codes and AFM signal with NissDataScan as D says, check plugs, do a compression check while they are out.
    • It is hard to be specific half way across the world...but it *seems* like it might have a minor issue. Is the idle stable and does it rev smoothly? I would not expect any pops out of what I am assuming is a standard ECU, standard tune, standard exhaust. You can use Nissan Data Scan to find out exactly what is happening when it runs, the cable/software is reasonably affordable if you are not planning on changing the ECU (which hopefully you are not with an NA skyline) BTW your mileage may not be that far off, these are heavy old tech cars, and being NA might mean you use a heavy foot to keep up with traffic....
    • Hey guys! Y'all are the masters so figured I'd check in on a few items here. - My engine sounds ever-so-slightly more raspy than the other NA RB25s I've listened to. It's barely noticeable but definitely a slightly different sound. - When I back off the throttle at high RPM, I will sometimes get a pop out of the exhaust, assuming this can be diagnosed as misfire. Some history on the car: - Had an exhaust leak in auction sheet but was claimed to be fixed by seller (bought from USA importer).  - Car's coil packs and sparks were replaced when it was sold to me, but unsure on what the gap is and whether the coil packs are correct.  - A prior mechanic had misdiagnosed a pilot or throwout bearing sound as LSPI/detonation. Had played with timing a bit, pops/raspy sound of engine just got worse. Got timing reset. - Had failed emissions a few times. First time went in as is, failed. Second time, replaced cat, still failed, running rich as hell. Third time replaced o2 sensor, passed. Car still smells gassy though. - Timing belt and valve cover gasket also replaced.  - Gas mileage is... low. about 350-400K per tank.  Any idea if I'm having any serious issues here or does this all sound like normal old NA RB stuff and I'm fine to drive it with the pops/slightly raspy engine? If it'll help, I can get drop a video of the sound of the engine.
×
×
  • Create New...