Jump to content
SAU Community

Recommended Posts

ok im sure the alarm in my R33 is standard and i have a dongle with 2 buttons on it i have never used the 2nd button on the 1st 1 it is black and like a kidney shape with 2 grey buttons with an LED in between the buttons features are turbo timer and imobolizer cent lock.

I have no ideahow to use or config this alarm at all can anyone post a pic or manual ?

Link to comment
https://www.sau.com.au/forums/topic/358727-r33-standard-alarm-whats-it-do/
Share on other sites

show me the remote. I have NEVER seen a factory fitted alarm in one of those. dealer fitted - seen plenty and ripped plenty out. yours sounds like a jap aftermarket thing. the remote pic will tell me.

  • 5 weeks later...

to be honest its at least 10 yrs old. you wont find anything on it..

as for any good - maybe. at that age the units are prone to fail and if its installed in an average way - connections are probably working loose as well.

  • 1 month later...

that alarm is a problem waiting to happen, ditch it for something new and ADR approved. the siren backup battery will have to be dead or near death .

the old alarms can be scanned and remotes duplicated from a block away without you knowing. thats how bad they used to be. ditch it or save to buy a new one first , something is better then nothing

to pop the boot you need addition parts. actuator that pulls the release.unless the car is fitted already with a push button release. not the deal on the drivers floor kind

Edited by sapphiregraphics

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah pretty impressive hey, good to see quality products not over-shooting their prices. That's what drew me to buy the hypergear turbo, just a shame I've never got the chance to see it in action
    • Thank you GTSBoy and MBS206 I have done the compression test with the motor out of the vehicle, reason for the test was to see if I needed to remove the head and do rings etc while its out. I'm in the process of respraying the vehicle and tidying up a few things. Story behind it all is I've just purchased the skyline and it was running when I got it, never drove it on the street though as I wanted to pull it down and do it all up again before registering it. the gentleman I purchased it from told me the motor has a forged bottom end and has a decent tune through it but I was going to pull the sump off anyway to see if it is a forged bottom end. that's why I thought id do a compression test beforehand. 
    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
×
×
  • Create New...