Jump to content
SAU Community

Vcd

GeNOS
 Share

Recommended Posts

Cobey Rising Star

Cobey

Posted
Posted

im yet to master VDC controlling... i try skid with it, yet sometimes it has a MAD kickback... dam electrics.

i have tried holding vdc in for 10seconds and cycling the key, seems to be successful?

either that or i don't lose control as much therefore it doesn't kick in... it mainly kicks in when you rather "out there"/losing it?

otherwise, use the brake more, it seems to agree with it then.

Link to comment
https://www.sau.com.au/forums/topic/359219-vcd/#findComment-5737726
Share on other sites
GeNOS Collaborator

GeNOS

Posted
  • Author
Posted

im yet to master VDC controlling... i try skid with it, yet sometimes it has a MAD kickback... dam electrics.

i have tried holding vdc in for 10seconds and cycling the key, seems to be successful?

either that or i don't lose control as much therefore it doesn't kick in... it mainly kicks in when you rather "out there"/losing it?

otherwise, use the brake more, it seems to agree with it then.

reason i ask is iv got a skid pan day coming up. normal driving its never an issue

Link to comment
https://www.sau.com.au/forums/topic/359219-vcd/#findComment-5738658
Share on other sites
Cobey Rising Star

Cobey

Posted
Posted

turning off/on.

xscape... you've never had traction kick in?

maybe something to do with my wheels.

but ive had mine off doing rather quick mountain runs and it still kicks in on occasion... plus ive been sliding it it for it to kick in. and stay on once too.

Link to comment
https://www.sau.com.au/forums/topic/359219-vcd/#findComment-5740370
Share on other sites
GeNOS Collaborator

GeNOS

Posted
  • Author
Posted

mine only ever kicks in if i get some under steer . but just wanted to check if there was any options i could try when i was there if i had any issues

LSD makes a massive differnce to how it works from what iv read.. the open diff models seem pretty dangerous

Link to comment
https://www.sau.com.au/forums/topic/359219-vcd/#findComment-5740421
Share on other sites
Bourbon Boy Community Regular

Bourbon Boy

Posted
Posted (edited)

A quick press of the VDC button turns traction control OFF from 0-60 kph. The VDC OFF indicator light will turn on.

VDC will automatically switch itself back on (regardless if the VDC OFF light is on) after you reach speeds 60 kph and beyond.

Pressing the VDC button for 3 or more seconds will switch it off completely (I usually count to 8 just to make sure).

The VDC OFF indicator light will turn on. I have taken the car on the track with this setting.

Pressing the VDC button for more than 10 seconds will turn the VDC OFF indicator LIGHT OFF and it will remain OFF (you can't turn it back on just by pressing the VDC button again where in the other settings you can) until you turn the car Off then On again. I dont know what this setting does but I have tried launching the car hard on this setting and the traction control kicked in so I dont know it's purpose.

Edited by Bourbon Boy
Link to comment
https://www.sau.com.au/forums/topic/359219-vcd/#findComment-5740976
Share on other sites
  • 6 months later...
T4NK Experienced

T4NK

Posted
Posted

Hey guys i had a VDC issue last night when doing some spireted driving on a sweeping right hand corner very long corner also going up hill, i had the car at the point where the traction control had just kicked in and the slip light was flicking on and off, and then half way through the corner the VDC turned its self off all togeather, the VDC off light came on and the slip light stayed on, i didnt hit the button at all and i couldnt turn it back on untill i turned the car off and back on and it turned its self back on at that point also. Is this a normal cut off for the V or should i have it looked at as i dont want it to turn off on me when i need it.

P.S i dont drive like a wanker ether my car is making a noise when turning left was trying to get it to do it for a mechanical friend to get his opinion on what it was.

Link to comment
https://www.sau.com.au/forums/topic/359219-vcd/#findComment-6057173
Share on other sites
  • 3 weeks later...
j_coote Rookie

j_coote

Posted
Posted

I learnt something interesting about the VDC the other day (you guys may already know of this...) I had a wheel alignment and they guys adjusted the toe so that the steering wheel was straightened (it had been a little off since i'd got the car). My VDC had never given me any drama before, I'd even driven it on the track and if I wasn't pushing super super hard, it wouldn't kick in anywhere, even with it still switched on.

But after the wheel alignment, it was kicking in ALOT even under normal driving. It was actually making it dangerous as it would start braking wheels when it really shouldn't have been.

After alot of research I finally found somewhere that mentioned you have to take the car into Nissan and get them to do some precedure that tells the computer where 'straight ahead' is again. I did this and it is now much better. Still not quite as lenient as it was before, but a huge improvement as now it only kicks in under quite spirited driving.

Just thought I'd add this in here as it may help some people with VDC issues similar to what I experienced after the wheel alignment.

Link to comment
https://www.sau.com.au/forums/topic/359219-vcd/#findComment-6086072
Share on other sites
sonicii Veteran

sonicii

Posted
Posted

And the really annoying part is it must be done by Nissan. Where as the same adjustment in the J31 Maxima can be done without Consult, using a series of switch presses and key turns.

I am about to get a wheel alignment done on mine after replacing the compression rod bushings, hopefully I won't need to go to Nissan and pay them $35 to plug in a consult unit and press 'reset' in the right spot..

Link to comment
https://www.sau.com.au/forums/topic/359219-vcd/#findComment-6086375
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      Well, this is probably where a wiring diagram and a multimeter come into play.
    • Jarsky
      gauge needle removal

      By Jarsky · Posted

      I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Jarsky
      R33 GTST Axles

      By Jarsky · Posted

      Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Jarsky
      R34 Speedo not working after manual swap

      By Jarsky · Posted

      Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Rezz
      DeAgostini 1/8 scale BNR32 Nissan Skyline GT-R Nismo

      By Rezz · Posted

      Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia front end... *Edit: On closer inspection the test car still had the R32 body, but only the front end had Silvia panels etc.
×
×
  • Create New...