Jump to content
SAU Community

Leaking Injectors....

GODZ1LLA

By GODZ1LLA,
in Western Australia

 Share

Recommended Posts

GODZ1LLA Proficient

GODZ1LLA

Posted
Posted

Covered a million times on here before and i have done a search as well..

But basically my new r33 gtr skyline's injectors are leaking from around 3 of them, 2 being at the top of the injector and the other from the bottem..

One of the ones that leaks from the top (nearest to front of engine) just pours out constantly..

Whats the best solution to curing this? car is stock with stock injectors.

Should i just take it to an injector specialist in bunbury (although i dont any) can anyone reccomend anyone? so they can clean and put new seals on (hoping that they are not cracked) and clean them...

Or should i just buy later injectors off a r34 gtr???

Link to comment
https://www.sau.com.au/forums/topic/359711-leaking-injectors/
Share on other sites
heller44 Mentor

heller44

Posted
Posted

If it is leaking from the top, then a set of o-rings should sort out your issues.

What you will probably find if it is leaking from the bottom is that it is coming from the centre section of the injector body, where the plastic casing and metal assembly meet. From dim and distant memory mine looked like it was coming out some sort of casting flash on the side. Had 2 leaking I think.

If that is the case, then either isolate the leaking ones and replace with tested good ones, or use it as an opportunity to upgrade.. I bought a set of 700 sards, and to go with it a PFC, and to go with that, a set of -5's, and to go with that........ :blush:

GODZ1LLA Proficient

GODZ1LLA

Posted
  • Author
Posted

Yeah thought so, gonna read up on how to take em off and inspect them myself...

And then find some were to fix em unless it seems an easy fix then its justa case of getting new o rings hey...

Incorrect sizing??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • funkymonkey
      Howdy Y'all

      By funkymonkey · Posted

      Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Dose Pipe Sutututu
      Starting again

      By Dose Pipe Sutututu · Posted

      Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • R33_Guy
      Speed Sensor replacement

      By R33_Guy · Posted

      Thank you so much for the help
×
×
  • Create New...