Jump to content
SAU Community

Recommended Posts

I'll start by saying my car got yellow stickerd on saturday for a loud ehxuast.. Now what I need to know is whats the deal with taking ur car to the pits? Is it easy to spot the place to line up place if im the first person there.. Also does the O'Connor pits accept skylines? ... And is it hard to get a booking at any of the other places ? because my car will be unlicensed by the 14th if i dont get it down there before that date..

THANKS!

Link to comment
https://www.sau.com.au/forums/topic/360155-pits-question/
Share on other sites

I got yellow as well for pod and not having mash at the front bumper 2 weeks ago .

went to O'Connor with all my mods and adjustable coilovers they just told me to raise the car a bit coz the exhaust part was below minimum 100mm.

It all depends who you get as an inspector sometimes they can be nasty or good to you ...

try to keep it as stock as possible no flashy mods and all you lights & indicators ,seatbelts must work and you will be fine.

if you modified turbo ,exhaust manifold,suspension you will need to fill Vehicle Standards Bulletin 14 (VSB 14) from and submit it usually take around 3-4 weeks for form to get processed.

http://www.infrastructure.gov.au/roads/vehicle_regulation/bulletin/vsb_ncop.aspx

hope this helps mate

Link to comment
https://www.sau.com.au/forums/topic/360155-pits-question/#findComment-5750602
Share on other sites

Fees yeah, initial fee is like 87 or something.

Retest 70something.

For the non bookings, if you want first in, get there really early.

I just got there about lunchtime, brought food drink and played games on my phone lol. (Waited 30-45mins-ish)

As for spotting it, I went to the Welshpool one and its next door to the licensing centre there - 4 big lanes with roofs over it so yeah, easy to spot :P

Edited by Ten Four
Link to comment
https://www.sau.com.au/forums/topic/360155-pits-question/#findComment-5750797
Share on other sites

I'll start by saying my car got yellow stickerd on saturday for a loud ehxuast.. Now what I need to know is whats the deal with taking ur car to the pits? Is it easy to spot the place to line up place if im the first person there.. Also does the O'Connor pits accept skylines? ... And is it hard to get a booking at any of the other places ? because my car will be unlicensed by the 14th if i dont get it down there before that date..

THANKS!

LOL does the oconnor pits accept skylines! hahaha

ok seriously, first inspection fee is $87.40, reinspection fee is $61.00, just go there and you will see which line you have to go to. If you are going for an inspection prior to 830am please make sure you pre-pay your inspection (go to a licensing centre or call 13 11 56 to pre-pay).

Link to comment
https://www.sau.com.au/forums/topic/360155-pits-question/#findComment-5751680
Share on other sites

....

ok seriously, first inspection fee is $87.40, reinspection fee is $61.00, just go there and you will see which line you have to go to. If you are going for an inspection prior to 830am please make sure you pre-pay your inspection (go to a licensing centre or call 13 11 56 to pre-pay).

Jeez, that's expensive (Or is it always been that prices?). :(

Link to comment
https://www.sau.com.au/forums/topic/360155-pits-question/#findComment-5751686
Share on other sites

Pretty sure it's always been those prices. Farkin bullshit when you have to pay for a reinspection to get an extension when you haven't changed anything... Like when I had to replace the aluminium pedals on my car with factory rubber ones, I couldn't find a factory accelerator pedal so I bought one from Nissan. Was gonna take 4 weeks to arrive so I tried to explain that to the pits. Nope, I had to get the car inspected that week to get a two week extension, then again in two weeks to get another one week extension. Had to pay fucking $185 despite knowing that it was going to fail each time.

Link to comment
https://www.sau.com.au/forums/topic/360155-pits-question/#findComment-5751746
Share on other sites

LOL does the oconnor pits accept skylines! hahaha

ok seriously, first inspection fee is $87.40, reinspection fee is $61.00, just go there and you will see which line you have to go to. If you are going for an inspection prior to 830am please make sure you pre-pay your inspection (go to a licensing centre or call 13 11 56 to pre-pay).

Do you work at the pits?

Link to comment
https://www.sau.com.au/forums/topic/360155-pits-question/#findComment-5751837
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...