Jump to content
SAU Community

Fully Built 1000Hp Rb26!

scr33m
 Share

Recommended Posts

dirty thimble Enthusiast

dirty thimble

Posted
Posted

rb26zed, on 03 June 2011 - 11:40 PM, said:

Sorry, I'm not interested in buying your engine, but I am curious as to how someone spends the time, effort and of course money to build a $22000, 1000hp engine, drives it 1500km then suddenly needs to sell it at a huge loss.

the guy i bought it off of got it built for his street gtr and decided to take it out to put it into another gtr for drag racing but decided he wanted an rb26/30 instead.

Still doesn't answer why you are selling it though after only just purchasing it.

hypo33 Contributor

hypo33

Posted
Posted

i dunno what fuss is about,, wish i had a spare 10k i would snap it up right away,, he does not need to give a reason for sale as u could just put it on a engine dyno before purchase if u are serious about buying this bargin and are skeptical about the sale. GL with your sale mate,, surprised its not sold,,, bloody tight arses.

  • 2 weeks later...
  • 2 weeks later...
SargeRX8 Grand Master

SargeRX8

Posted
Posted

8500....? ill give u 9 grand if u engine dyno it and prove its a healthy new motor capable of 1000hp...

pm me when your ready

That is a little hard for him to do. The motor was built by a reputable group(matouks, he is quite famous for his RB's). I'm sure if you call them up and ask about the motor they can help you out. I don't think scr33m has the turbo and other gear needed to demonstrate the 1000hp. Just because he bought the motor does not mean he has the turbo and other gear for it.

32rrr Collaborator

32rrr

Posted
Posted

That is a little hard for him to do. The motor was built by a reputable group(matouks, he is quite famous for his RB's). I'm sure if you call them up and ask about the motor they can help you out. I don't think scr33m has the turbo and other gear needed to demonstrate the 1000hp. Just because he bought the motor does not mean he has the turbo and other gear for it.

Just because a workshop built A 1000hp engine it doesnt mean that this is the one, the only way to proved this thing has all the fruit is to pull it down and have pictures of ALL the parts that are in it, for the sake of being able to proved everything is there you dont even need to replace anything except the head gasket.

Showing the engine sitting on a pallet like that means nothing to me or anyone who is actually looking to buy something like this to save themselves some money

As far as i'm concerned with seeing the picture thats been supplied of that motor all it has is cam gears, ati balancer and a piss weak single plate clutch sitting next to it.

Biggest sus thing for me is the bog stock turbo's sitting right next to it on the floor like they've just been pulled off.

SargeRX8 Grand Master

SargeRX8

Posted
Posted

Just because a workshop built A 1000hp engine it doesnt mean that this is the one, the only way to proved this thing has all the fruit is to pull it down and have pictures of ALL the parts that are in it, for the sake of being able to proved everything is there you dont even need to replace anything except the head gasket.

Showing the engine sitting on a pallet like that means nothing to me or anyone who is actually looking to buy something like this to save themselves some money

As far as i'm concerned with seeing the picture thats been supplied of that motor all it has is cam gears, ati balancer and a piss weak single plate clutch sitting next to it.

Biggest sus thing for me is the bog stock turbo's sitting right next to it on the floor like they've just been pulled off.

I never said it was or wasn't I was just saying that you could call up the builder of the motor, inquire about when the motor was built, who it was built for, the parts used and what ever you need to ask. Most reputable builders are true and honest because they dedicate them selves to the products they build.

And my argument was not about not pulling apart the motor. Someone on previous pages asked him to chuck it on an engine dyno. I know the turbos sitting near the engine don't make it look too great but you can't expect the guy to have all the gear to get it thrown on a dyno to attempt to prove power. I was not arguing against pulling the motor apart for photos of piston tops, studs and looking into the head for head work, but more so the seller having the parts to obtain a engine dyno displaying the power output.

Its like when you go to inspect a car to buy. The seller can give you all the words in the world saying he has forged pistons, aftermarket rods, new bearings and what not and be asking just an average price. He can say he bought the car from bla bla person with the mods done and have no receipts. You can't ask the guy to strip his motor down just to show you it has the parts before you buy it. I know the situation is different but its the same thing. My brother has bought two fully built 13B motors. One had paper work, the other had nothing. Both motors were shown on a pallet. Both were built by reputable builders and sold on forums just like this(aus rotor). He contacted the engine builder to attempt to verify the original seller and the parts and work done on the motor. Both motors have done what they were told they were to do and are now with other people who bought them off him.

If you don't feel comfortable, you should not outlay your money. Even if someone showed me photos of the engine internals, I wouldn't buy it. A motor is something I would not buy without my own personal inspection. Each to their own. I'm not angry or anything I'm just putting shit out there lol.

And someone PM'd me offering 6k for a motor. I AM NOT THE SELLER lol.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      33 GTR Broken front wheel knuckle

      By GTSBoy · Posted

      There's plenty of OEM steering arms that are bolted on. Not in the same fashion/orientation as that one, to be sure, but still. Examples of what I'm thinking of would use holes like the ones that have the downward facing studs on the GTR uprights (down the bottom end, under the driveshaft opening, near the lower balljoint) and bolt a steering arm on using only 2 bolts that would be somewhat similarly in shear as these you're complainig about. I reckon old Holdens did that, and I've never seen a broken one of those.
    • MBS206
      33 GTR Broken front wheel knuckle

      By MBS206 · Posted

      Let's be honest, most of the people designing parts like the above, aren't engineers. Sometimes they come from disciplines that gives them more qualitative feel for design than quantitive, however, plenty of them have just picked up a license to Fusion and started making things. And that's the honest part about the majority of these guys making parts like that, they don't have huge R&D teams and heaps of time or experience working out the numbers on it. Shit, most smaller teams that do have real engineers still roll with "yeah, it should be okay, and does the job, let's make them and just see"...   The smaller guys like KiwiCNC, aren't the likes of Bosch etc with proper engineering procedures, and oversights, and sign off. As such, it's why they can produce a product to market a lot quicker, but it always comes back to, question it all.   I'm still not a fan of that bolt on piece. Why not just machine it all in one go? With the right design it's possible. The only reason I can see is if they want different heights/length for the tie rod to bolt to. And if they have the cncs themselves,they can easily offer that exact feature, and just machine it all in one go. 
    • Bennym35
      New guy

      By Bennym35 · Posted

      The roof is wrapped
    • Duncan
      R34 GT-T cycling ABS pump

      By Duncan · Posted

      This is how I last did this when I had a master cylinder fail and introduce air. Bleed before first stage, go oh shit through first stage, bleed at end of first stage, go oh shit through second stage, bleed at end of second stage, go oh shit through third stage, bleed at end of third stage, go oh shit through fourth stage, bleed at lunch, go oh shit through fifth stage, bleed at end of fifth stage, go oh shit through sixth stage....you get the idea. It did come good in the end. My Topdon scan tool can bleed the HY51 and V37, but it doesn't have a consult connector and I don't have an R34 to check that on. I think finding a tool in an Australian workshop other than Nissan that can bleed an R34 will be like rocking horse poo. No way will a generic ODB tool do it.
    • GTSBoy
      33 GTR Broken front wheel knuckle

      By GTSBoy · Posted

      Hmm. Perhaps not the same engineers. The OE Nissan engineers did not forsee a future with spacers pushing the tie rod force application further away from the steering arm and creating that torque. The failures are happening since the advent of those things, and some 30 years after they designed the uprights. So latent casting deficiencies, 30+ yrs of wear and tear, + unexpected usage could quite easily = unforeseen failure. Meanwhile, the engineers who are designing the billet CNC or fabricated uprights are also designing, for the same parts makers, the correction tie rod ends. And they are designing and building these with motorsport (or, at the very least, the meth addled antics of drifters) in mind. So I would hope (in fact, I would expect) that their design work included the offset of that steering force. Doesn't mean that it is not totally valid to ask the question of them, before committing $$.
×
×
  • Create New...