Jump to content
SAU Community

Recommended Posts

hi guys...2 weeks ago i had a autobox in my cefiro and all run fine...now i got a rb20 manual in there and changed to a r32 ecu(thinking of buying a nistune chip^^)

the car runs really good, like always, idle is fine too when cold and warm...problem is if i drive down the road and try to stop i gotta clutch in lol

everytime i clutch in when downshifting or stopping the engine die >_<>_<>_<

sometimes the rev's drop to about 200-300rpms and then go up to the normal idle of about 600rpms but mostly when i kick the clutch in rev's drop just to zero and engine is dead!:glare:

the car is 100% stock, i got the aftermarked bov out, checked for leaks in the intercooler piping but nothing, idlevalve is cleaned too...

i'm going nuts, so pls community help me out :worship:

Link to comment
https://www.sau.com.au/forums/topic/360364-cefirorb20det-idle-problem/
Share on other sites

problem is if i drive down the road and try to stop i gotta clutch in lol

Yeah manual is a bit different to auto...takes some getting used to :P

Does it do this after being on boost / off boost / both.

I'd say adjust the TPS unless it's boost related.

hmm i got no air/fuel gauge:(

and i got nothing to adjust too, i can buy nistune when the car is perfect^^...don't wanna buy now and then wait 2 months for money to get the car repaired >_<

Yeah manual is a bit different to auto...takes some getting used to :P

lol it's not the first time i drive a manual,...thats not the problem^^

Does it do this after being on boost / off boost / both.

I'd say adjust the TPS unless it's boost related.

it's not just on boost, sometimes i drive 2000rpm and it dies...

i realize it dies everytime when i drive constant the same rpm a few minutes long and then stop...

btw with boost i got no issus,...it boosts great like always

nope no smoke,...but i think it could run a lil bit rich? maybe normal but i think it smells too much like gasoline out of the exhaust^^

gotta try to find a air/fuel gauge...btw does it has to be a expensive aem or does the cheap ones work too?

watertemp sensor is fine, the one for on the dash is find, but the another one for ecu i don't know how to check?

nope no smoke,...but i think it could run a lil bit rich? maybe normal but i think it smells too much like gasoline out of the exhaust^^

gotta try to find a air/fuel gauge...btw does it has to be a expensive aem or does the cheap ones work too?

watertemp sensor is fine, the one for on the dash is find, but the another one for ecu i don't know how to check?

i love the way the emission fumes smell from Rb's really rich call me crazy lol

But the AEM's are good brand

Good Luck

I would say unless youre planning to go really into the drag and drifting the regular gauges will work fine

I have some regular gauges and they do the job ,been 2 years and no problems

They work well for my everday usage

As for yur problems as nic mentioned try another MAF and look into the mixture

Good Luck

i wanna really drift and use daily,...ok 200usd for these:(

but ok i won't need to buy these 5times a year:D

just ordered one @ aem

btw does it has to be a maf from a cefiro or a random r32 rb20det maf will be good too...

Not sure about the different MAF my advise is take the care where you would be buying it and try it to see if it works

I know some of the skyline MAF's work as they are skyline engines

As for the gauges youre good to go some years on that

If the AFM label is Purple and marked N60...it can be interchanged with Z32 300ZX [N/A only], J30 Maxima, or pretty much any Nissan with a VG30xx engine.

If its label is green, marked J60, it is interchangeable with R32 GTS-T RB20DET

If its not either of those colors let me know...but it should be one of the two, if it's not you got a problem.

i just borrow'd the maf from a friends friend and tested,...the same problem...>_<>_<>_<

now was thinking what i wouldn't need here and saw the cold start valve, here in thailand you won't get under 10degrees except you're on highest mountain here so got that piece of shit out and here we goooooo ideling alot better now :worship:

that f**king thing had a lil crack on it,...

i'm still waiting for the aem uego air/fuel gauge but i see a bit difference between the a31 auto ecu and the r32 manual ecu:

a31 stock ecu:

-idle is a tiny lil bit better

-but i waste a damn lot of gasoline!!! nearly 4 times more than the r32!:pwned:

donno but i think it's running hardcore rich to use that amount of gasoline...i had this one from beginning and car was drinking more fuel than i'm drinking beer in a month:D

-stock rpm gauge won't work with this one,...donno why?

r32:

-rpm gauge works surprisingly (i never touched the wireing!?)

-idle is a lil bit worser than the a31 but still driveable, not that bad...

-fuel economy is reasonable,...very good with that ecu...

from what i've read there shouldn't be a difference...abit confusing :closedeyes:

i had this problem.. give it some stick or even just drive through the gears. clutch it to roll to a stop and it would die.

Cas - advance it just a tad

Vacuum leak - check all lines

Throttle body. give it a good clean and make sure its adjusted properly

  • 2 years later...

I had the same problem on my car when I first got it, it is most likely a vacuum leak.

check and clean your IVAC and ACC also it should be a part of your maintenance anyway

And the simplest way to check for your leak is just to use carb cleaner and listen for a idle change to check for your leak.

Here is a video of what I mean: http://www.youtube.com/watch?v=9CPqbaSgcok

remember our cars are pretty old at this point so the hoses are just getting old so you might have the smallest crack in your lines so move them around to expose anything and check if they are getting hard.

This might help you out too : http://www.skylinesaustralia.com/forums/topic/174735-fixing-idlestarting-problems-rb25det-cleaning-air-regulator-easy-way/?hl=%2Bclean+%2Byour+%2Bacc

I have a 25 but search around if it is different on your 20

good luck and i hope everything works out!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
    • Sorry I meant that we are building the EH for a client.
    • LOL, when one "money pit" is never enough Noice, and excellent work mate
×
×
  • Create New...