Jump to content
SAU Community

Recommended Posts

It's not factory, so you can get picked up for it.

But it'll take an asshole.

Throw in a small switch on your switch board (if you have one) which you can use to turn them on/off as you need. Turn them on for show, and off for general driving.

Edited by SKITTLES

It's not factory, so you can get picked up for it.

But it'll take an asshole.

Throw in a small switch on your switch board (if you have one) which you can use to turn them on/off as you need. Turn them on for show, and off for general driving.

Ah k yeah makes sense then. Will put a switch on it i think, good call dude. Cheers for advice :)

I think it won't be illegal if you make it work like a brake light.

So it's dim when you have your headlights on but it goes brighter as you brake.

Also, it has to be red.

Yeah that makes sense. where would i be able to find out for sure?

go and talk to the people who you are worried about getting booked by :thumbsup: highway patrol if you can...i dont see what wrong with it if it is working as a functioning brake light..but i dont know about having a blue light next to the red ones on the back of the car, they might not agree with that :glare:

Blue lights on a car are illegal - emergency vehicle colour.

Any red lights can only point rewards - brake light colour.

Any white lights can only point forwards - head light colour.

Pretty sure that law is the same in any state of Australia. There are grey areas but we don't need to go into them for this.

So do it red and you will have no problem what so ever.

Blue lights on a car are illegal - emergency vehicle colour.

Any red lights can only point rewards - brake light colour.

Any white lights can only point forwards - head light colour.

Pretty sure that law is the same in any state of Australia. There are grey areas but we don't need to go into them for this.

So do it red and you will have no problem what so ever.

F*** lol. i just siliconed the blue led on the car ! gunna be a pain in the ass to get off! but i suppose its worth it! Other alternative is to have blue and red and be able to turn em on and off wen i want. on separate switches tho.

Blue lights on a car are illegal - emergency vehicle colour.

Any red lights can only point rewards - brake light colour.

Any white lights can only point forwards - head light colour.

Pretty sure that law is the same in any state of Australia. There are grey areas but we don't need to go into them for this.

So do it red and you will have no problem what so ever.

+1

Mine is red and only comes on with the brake lights.

I've had coppers behind me at lights many times. No problems so far.

If I do get pinged,

My argument would be, to remind drivers behind me :it's a Skyline so back off : you're only gonna lose anyway ! :action-smiley-069:

+1

Mine is red and only comes on with the brake lights.

I've had coppers behind me at lights many times. No problems so far.

If I do get pinged,

My argument would be, to remind drivers behind me :it's a Skyline so back off : you're only gonna lose anyway ! :action-smiley-069:

So urs comes on only when u press the pedal or its 2 toned, as in its dim and then goes bright on pedal press?

Haha fkn good arguement! hilarious!

So urs comes on only when u press the pedal or its 2 toned, as in its dim and then goes bright on pedal press?

Haha fkn good arguement! hilarious!

No, not two tone, just comes on with brakes.

Two tone you'll need two sets of leds ?

I wouldn't do it anyway, cops might argue if it's on all the time people may mistake it for a brake light and brake suddenly.

post-25026-0-96708800-1302590630_thumb.jpg

To make it bright for Braking and normal/dim not braking. Wire the tail light and brake light to the LEDs. Put an extra resistor (you'll have to determine how big yourself) and a Diode in series on the tail lighy wire and just a diode on the brake wire.

Edited by deano3350

No, not two tone, just comes on with brakes.

Two tone you'll need two sets of leds ?

I wouldn't do it anyway, cops might argue if it's on all the time people may mistake it for a brake light and brake suddenly.

Aparently u can do it with the method undearneath ur comment :) so i might give it a go n if its too hard il just put a switch on it!

To make it bright for Braking and normal/dim not braking. Wire the tail light and brake light to the LEDs. Put an extra resistor (you'll have to determine how big yourself) and a Diode in series on the tail lighy wire and just a diode on the brake wire.

I shall give it a go n if i run into trouble sounds like ur the guy to talk to :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...