Jump to content
SAU Community

Recommended Posts

Any thing is possible if u have money to waste, If your doing it yourself and know what your doin id say a couple months depending opn your skill level & time allocated etc paying a garage or something if you could even find anyone willing to do it id say ud be lookin around 8-10k, but at least theyd do a good job. just buy another car if you had that sort of coin, I think Wangan Midnight does these sort of conversions in his shed, shoot him a pm he might be able to help you

Edited by rickr333

Wait. You're swapping an RB20det OUT of an N/A car? or swapping the DET with a DE engine? Either way, it's gernerally over capitalising.

If it's a non-turbo car, service it and sell it on to a P-plater. They pay top dollar for the privilege.

Use the money to buy a turbocharged car. Win win.

Edited by Truffles

I think Wangan Midnight does these sort of conversions in his shed, shoot him a pm he might be able to help you

Out-freakin-standing hahahahaha.

hooon, what was the car originally, gts or gtst. swapping an engine over is a lot of effort, your $500 quote is probably for just swapping an engine with another of the same engine with things going well.

The car would have required a new ecu, wiring loom, and engine, and the addition of an intercooler, plenty of piping, turbo etc etc to be changed from gts to gtst.

The NA section has heaps of info there if you search for it, sooooo many threads detailing engine swaps and costs etc.

Also why do you want to go NA anyways? If it were me I'd be putting an rb25det in there with a highflow turbo.

The car was originally a gts-t, I only want to swap the engine for a n/a beacause of the restrictions, no insurance etc, and the engines not in very good condition.

What restrictions? Are you a p plater?

Insurance? It is unlikely to be any cheaper for a highly modified car, which is essentially what an engine transplant is. Think about it, it's not a gtst, it's a gtst+engine swap, which is a lot harder to replace than just a gtst, which there are many of these days.

What restrictions? Are you a p plater?

Insurance? It is unlikely to be any cheaper for a highly modified car, which is essentially what an engine transplant is. Think about it, it's not a gtst, it's a gtst+engine swap, which is a lot harder to replace than just a gtst, which there are many of these days.

I'm guessing he would be a p-plater.

Yes it would be cheaper, probably. It doesn't matter about the "replacement" car. The insurance company will just give a value and payout according to that. They don't care what you replace it with once they give you the money.

I'd be double checking to see you can rego and insure a turbo car that's had the N/A engine swap, as a P-plater. Should be able to, but it's worth setting up before you spend all the money.

As I originally said; unless you can swap the engine yourself, it's not a financially smart option to essentially make the car worse than it already is. Buy a factory N/A or wait until you're on your open license and buy a factory turbocharged car.

Edited by Truffles
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...