Jump to content
SAU Community

Denso 800Cc Injectors

TroyBoy33
 Share

Recommended Posts

TroyBoy33 Collaborator

TroyBoy33

Posted
Posted (edited)

Hi guy's

Have a set of denso 800cc injectores with fule rail braided lines and sard fule reg. for sale..

Reason for sale iz the person whom i bought the set up from informed me they would fit under the standard plenum when they didn't due to the rail height of the aftermark rail

the injectores came out of an r33 skyline rb25det, there for they are high impeadence to suit the gts-t .. and cum with loom to plug straight into standard plug in the engine bay..

Located in melbournes s.e.suburbs

after $580 for the lot..

Very much a dirrect fit with a forward facing plenum..

post-50885-0-67054200-1302509827_thumb.jpg

Best way to contact me on 0403 236 931 or p.m me..

Thanx for looking ..

Edited by TroyBoy33
Link to comment
https://www.sau.com.au/forums/topic/360535-denso-800cc-injectors/
Share on other sites
TroyBoy33 Collaborator

TroyBoy33

Posted
  • Author
Posted (edited)

oh ok what bout just the injectors themselves without the rail

i supose if you could by another rail to fit that sits a lil lower but i don't know whitch one would..?

Edited by TroyBoy33
TroyBoy33 Collaborator

TroyBoy33

Posted
  • Author
Posted

how much for injectors only mate

i cant really do much with the rail alone so its not worth much to me, so lets say..

$ 350.00 for the injectors

$ 130.00 for the Sard Reg.

$ 50.00 for the rail and braided lines

Or $500.00 for the lot..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...