Jump to content
SAU Community

Recommended Posts

Hey guys is the mk2 mr2 a good handling car? i dont mean stock i mean with sways, rolls, coilovers, camber can it out handle an evo. and what i mean by handle not just predictability i mean outright grip. its a very light car sp yh. i know there are better cars but i need to know about this one.

Link to comment
https://www.sau.com.au/forums/topic/360707-mk2-mr2-spyder/
Share on other sites

u mean the second generation/ W20?- the turbo one yeah? If so id say yes. they are meant ot be awesome and with that kind of fruit on em it would be epic. Meant to bite back pretty hard if you go past the limit tho :s. Similar to a porsche turbo- particularly the 80's models.

If an MR2 could have seated 1 more person or my 42kg greyhound id be one the MR2 forums right now in stead of SAU... Drove a 200+kwatw MR2 turbo with coilovers etc etc and nearly took the dive anyway. As it tturns out my current GTST came up the next weekend and the rest is history for me ;)

Edited by jjman
Link to comment
https://www.sau.com.au/forums/topic/360707-mk2-mr2-spyder/#findComment-5759476
Share on other sites

Can you do an engine swap though? Maybe an LS1, I know the engine bay is not exactly large. I know you can do V6 conversions but that's not worth it. How possible is it to drop like an Audi RS4 engine in, the 4.2 ltr V8. They're expensive but I want it to be a special project. I know I should be asking on the MR2 forum but it's not a nice forum (whatever that means lol). I wonder if you guys know. By the way yes the Mk2 is the W20.

Link to comment
https://www.sau.com.au/forums/topic/360707-mk2-mr2-spyder/#findComment-5759809
Share on other sites

i thoguht F1 cars where frontwheel drive???

and...

i konw that you wanted answers but seriously close your eyes.. and imagine:

a light

mid engined

rear wheel drive

small capacity

superior toyota built

coilovers

sway bars

strut bars

reinforced Bpillars (i want to do this)

floor braced

MR2

close your eyes and imagine that car... does it SOUND like it'd handle good!? :) to me it does..

plus you're in Perth... so you have the support of WTF Auto.. Tristan LOVES to bone these cars!

http://www.cardomain.com/ride/777158/1994-toyota-mr2

Link to comment
https://www.sau.com.au/forums/topic/360707-mk2-mr2-spyder/#findComment-5759824
Share on other sites

...so you make a thread about how good the handling might be on an Mr2... then 7 posts down say the thread say that your project isn't about performance but about engine sound and how you want a V8

you make me racist, man.

Link to comment
https://www.sau.com.au/forums/topic/360707-mk2-mr2-spyder/#findComment-5759919
Share on other sites

no they are mid engine- rear wheel drive (like ferraris/ 2wd lambos).

Nonetheless this is generally agreed upon as the superior handling/drive layout. Hence why formula 1 cars use it...

Yes I know MR2's are Mid Mounted, RWD.

I was not asking what they were.

I was saying RWD vs AWD as the OP questioned MR2 vs EVO.

"This layout is typically chosen for its low moment of inertia and relatively favorable weight distribution (the heaviest component is near the center of the car, making the main component of its moment of inertia relatively low).

The layout has a tendency toward being heavier in the rear than the front, which allows for best balance to be achieved under braking.

However, since there is little weight over the front wheels, under acceleration, the front of the car is prone to lift and cause understeer."

- http://en.wikipedia.org/wiki/MR_layout

^^ A general summery of Mid Mounted, RWD, but in reguards to Lamborghini / Ferrari / F1 Cars, refiment would have been a must to counter that.

:)

Hey guys is the mk2 mr2 a good handling car? i dont mean stock i mean with sways, rolls, coilovers, camber can it out handle an evo. and what i mean by handle not just predictability i mean outright grip. its a very light car sp yh. i know there are better cars but i need to know about this one.

Yeah sure you can mod a MR2 with all that...

Mod the EVO with all that... Then what happens...

You wanted "outright grip", then I'd go EVO.

:)

Link to comment
https://www.sau.com.au/forums/topic/360707-mk2-mr2-spyder/#findComment-5760290
Share on other sites

Hey guys is the mk2 mr2 a good handling car? i dont mean stock i mean with sways, rolls, coilovers, camber can it out handle an evo. and what i mean by handle not just predictability i mean outright grip. its a very light car sp yh. i know there are better cars but i need to know about this one.

Can you do an engine swap though? Maybe an LS1, I know the engine bay is not exactly large. I know you can do V6 conversions but that's not worth it. How possible is it to drop like an Audi RS4 engine in, the 4.2 ltr V8. They're expensive but I want it to be a special project. I know I should be asking on the MR2 forum but it's not a nice forum (whatever that means lol). I wonder if you guys know. By the way yes the Mk2 is the W20.

I know and agree 110% but this particular project is less about performance and more about engine sound. It's complicated but I do need the sound of a V8.

LOL!

This guy!

Trollin!

Link to comment
https://www.sau.com.au/forums/topic/360707-mk2-mr2-spyder/#findComment-5760319
Share on other sites

I've owned 3 mid mounts in the past.

These cars are the best for 'seat of the pants' feeling. You can feel what the car is doing - and you feel like part of the car.

Properly setup, they can out-handle most vehicles. Damn, I kept up with a porsche in the wet on twisty roads in my old Fiat X/19 which had a 1.3 litre engine. It's just the straight line speed needs to be 'encouraged'.

Even a standard elise does well at a track day...

V8 in an MR2.... please.... pffft

Link to comment
https://www.sau.com.au/forums/topic/360707-mk2-mr2-spyder/#findComment-5760345
Share on other sites

i thoguht F1 cars where frontwheel drive??

i konw that you wanted answers but seriously close your eyes.. and imagine:

..,,,

close your eyes and imagine that car... does it SOUND like it'd handle good!? :) to me it does..

plus you're in Perth... so you have the support of WTF Auto.. Tristan LOVES to bone these cars!

http://www.cardomain.com/ride/777158/1994-toyota-mr2

Front wheel drive f1....when do do you live...1870????

Clossing my eyes....imagining....I'm seeing...lotus Elise.

Don't go with a mr2. The Elise is a much better car all-round

Link to comment
https://www.sau.com.au/forums/topic/360707-mk2-mr2-spyder/#findComment-5760454
Share on other sites

Oh wow someone thought I was being serious.

Hey everyone!!!! Come look at the guy that thought I was being serious... Lookathim... Doesn't he run like a Welshman?

I shouldnt troll when I've been drinking. I tend to take everything at face value :blush:

Link to comment
https://www.sau.com.au/forums/topic/360707-mk2-mr2-spyder/#findComment-5760708
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...