Jump to content
SAU Community

Micrometers

r31slpr

By r31slpr,
in General Automotive Discussion

 Share

Recommended Posts

Daleo Grand Master

Daleo

Posted
Posted (edited)

Looking at buying a couple micrometers and probably a telescopic gauge set, can anyone recommend some good brands?

cheers

Mitutoyo is the only brand I will use for Mics, verniers and dial indicators.

A 0-25mm, 25-50mm and a 75 -100mm with a 50mm extension piece will cover just about everything the average person would need to machine.

However, you can buy some good, no name brand telescopic gauges. I have a set of Kinchrome telescopic gauges.

The important thing with telescopic gauges is that they lock easily and firmly, so there is no error introduced, and you can measure off them with your mic. Check out afew different types at your local tool supplier, cheap ones and expensive ones. As always with precision tools; Feels crap = Is crap

Edited by Daleo
Link to comment
https://www.sau.com.au/forums/topic/360843-micrometers/#findComment-5760478
Share on other sites
warps Mentor

warps

Posted
Posted

Yes. Mitutoyo are very good. I have a Mitutoyo vernier that's 20 years old and still like new.

I asked for some micrometers for Xmas a few years ago (yes, I'm a sad nut) from the Hare and Forbes catalogue (where most of my presents come from), as they sell some good quality gear. Unfortunately they talked my wife into the "equally good, but much cheaper" Measurmax. Do not touch this stuff - it is absolute shit.

Fair enough it seems to work OK, but it is in a completely different league to the Mitutoyo. Remember, you're buying precision measuring gear that's meant to be accurate to a thou or better. Don't skimp out. If you can't afford a full set, then buy one item at a time and build up over a few years. You won't be sorry. If treated well, it will be with you for 50 years.

Link to comment
https://www.sau.com.au/forums/topic/360843-micrometers/#findComment-5760788
Share on other sites
Daleo Grand Master

Daleo

Posted
Posted

^^^^^+1 for this.

Buying cheap is false economy, you'll only end up getting the shits and spending more to get what you should have in the first place.

I used to work with some old school Toolmakers, who've had the same Mics and Verniers (Mitutoyo) since they entered their Trade. Calibrate a couple of times a year (for constant, professional use), and treat them like a newborn baby; they'll be accurate forever. Now that's value for money.

Link to comment
https://www.sau.com.au/forums/topic/360843-micrometers/#findComment-5760849
Share on other sites
.:: GimpS-R34 ::. Grand Master

.:: GimpS-R34 ::.

Posted
Posted

I've used itutoyo throughout all my career.. my dad is a toolmaker by trade and he doesnt sell anything below Mitutoyo

LOL Measurmax.. equally good.. LOL.. they make more profit on them.. that is all

Link to comment
https://www.sau.com.au/forums/topic/360843-micrometers/#findComment-5760867
Share on other sites
Daleo Grand Master

Daleo

Posted
Posted (edited)

A quick bit of Googling revealed this; http://www.procureit...u/mitutoyo.html

And; http://www.justtools.com.au/category221_1.htm

Haven't dealt with either, but might be worth a look.

Edited by Daleo
Link to comment
https://www.sau.com.au/forums/topic/360843-micrometers/#findComment-5762201
Share on other sites
warps Mentor

warps

Posted
Posted (edited)

Good prices at Hare and Forbes (note these prices don't include GST, so you'll need to add it)

Hare and Forbes

If you're working with imperial measurements a lot then go that way, otherwise stick to metric. At any rate, make sure you're good at doing the conversions.

Make sure that all your gear is the same though. Nothing harder than trying to compare metric and imperial measurements from 2 different sets of measuring equipment (eg measuring end float with an imperial dial gauge, then making up a shim pack with a metric micrometer - even for a maths whiz the chances of making a mistake are high).

Edited by warps
Link to comment
https://www.sau.com.au/forums/topic/360843-micrometers/#findComment-5762669
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...