Jump to content
SAU Community

Recommended Posts

Make/Model: Nissan Pintara R31 Wagon

Year: 1987

Kilometers: 154,500

Transmission type: Auto

Engine: CA20

Colour: White

Modifications: See below

Roadworthy Certificate: N/A

Registered: Yes, till 14/5/2011

Accident History: None that I'm aware of

Asking Price: $2,000 ono

Location: Prospect, SA

Contact Details: Ryan, 0410 131 658

Other Comments: We've used this car since late 2007 to travel to motorsport events for filming, etc.

There are no real modifications, but repairs etc which have been done include:

- Full bottom end rebuild 10,000km ago (have receipts) with tune

- New distributor 10,000km ago

- New Pedders Comfort Gas suspension 10,000km ago

- R31 Skyline steering rack 10,000km ago (can be rebuilt, R31 Pintara can't)

- Sandblasted and polished Bluebird SSS wheels with Kenda Komet SPT-1 tyres (~10,000km old, good tread)

- Pioneer deck with front audio input

- JVC 4 channel amp

- Polk Audio 6.5" front splits

- Jaycar Response 6x9s with spacers (never actually fitted)

- Subaru WRX front buckets

- Autotechnica leather steering wheel

- New battery 3 months ago

- New O2 sensor (not fitted yet)

- Tow bar

- 14" Steel Wheels (supplied on request)

- K & N Pod filter with adaptor (not fitted)

Regularly serviced and maintained every 5,000km

Car has been well looked after and maintained over the 4 years I've owned it. Drives extremely well, and engine rebuild has livened up the engine.

I've upgraded to a M35 Stagea, and don't have room for this, so despite the sentimental attachment the car has to go.

Note: Rego is due on 14/5, and if purchased before this date I'll drop the price to $1700 to avoid paying rego, and in addition to all the above will put a full tank of fuel in.

Edited by bigkevracer
Link to comment
https://www.sau.com.au/forums/topic/360887-sa-1987-nissan-pintara-r31-wagon/
Share on other sites

  • 4 weeks later...

I'll try and get some soon Aaron, but its dirty again. Buy this so I don't have to keep two cars clean!!!

Now with 3 months rego and full tank of fuel!

Looking for a cheap daily/load lugger? Why buy something unknown when you can buy something completely rebuilt and reliable?

The only thing I'm aware of that needs doing is running new wires in the drivers door for the cross over.

Must go as it's taking up space and I want coilovers for the Stag!

  • 5 weeks later...

Now with pics!

Finally have some pics!

post-34363-0-48809600-1307949762_thumb.jpg

Tow bar all setup, electrics have been tested and work fine.

post-34363-0-91520000-1307949768_thumb.jpg

15" Bluebird SSS wheels with Kenda Komet SPT-1 tyres. Good tread, and car has been wheel aligned so no feathering or tyre dramas whatsoever. Will consider splitting wheels and tyres. Also has new (~10,000 km old) Pedders Comfort Gas shocks all round.

post-34363-0-21367800-1307949787_thumb.jpg

Cavernous boot, just like every other R31 Wagon. Gas struts are fine. There is a whole in the right hand side where the original owner had ONE 6x9 which wasn't connected correctly.

post-34363-0-21892800-1307949802_thumb.jpg

Interior with Subaru WRX front buckets, Pioneer CD/MP3 player with AUX in (and cable), and Autotechnica leather steering wheel. You can also see the tweeters for the Polk Audio splits.

post-34363-0-54895300-1307949813_thumb.jpg

post-34363-0-43522300-1307949827_thumb.jpg

post-34363-0-61354600-1307949841_thumb.jpg

post-34363-0-14481800-1307949855_thumb.jpg

post-34363-0-64852000-1307949875_thumb.jpg

post-34363-0-24720400-1307949898_thumb.jpg

New battery and terminal, put in within the last 12 months.

post-34363-0-97626200-1307949912_thumb.jpg

Rebuilt engine has been regularly serviced, has done around 10-15k kms since it was rebuilt. New plugs, plug leads, oil, filters, coolant, thermostat, distributor, distributor cap, etc. All quality fluids.

post-34363-0-24315500-1307949925_thumb.jpg

In addition to the above pics, will come with standard 14" steel wheels (if wanted), Jaycar 6x9s and new oxygen sensor.

Price drop to $1700 ono with three months rego (til 14/8) and a full tank of fuel. I really just need it gone now, so will take offers or consider splitting.

  • 2 weeks later...

No one? Bueller... Bueller...

This HAS to go. Make me an offer!

Will consider parting out if people are interested in the seats (and can provide originals), wheels or speakers.

I don't think you'll find anything else as reliable or well sorted for the money!

Council are complaining so drop to $1500 FIRM without any of the uninstalled parts (6x9s, steel wheels and filter).

Will also consider offers on the 15" Bluebird SSS wheels, which are in great condition and were sandblasted and polished prior to fitment of the tyres and fitting to the car.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...