Jump to content
SAU Community

Recommended Posts

So how many of ya's are actually going to that happy laps?

I'm still undecided....will probs just pay on the day if I go.

Ill be there in the skevy, will be its last outing as a two speed until my he box gets pulled... Depending on Chris's enthusiasm (as I haven't even asked him yet) I may be rocking some new BC's ;)

Well he never comes to lakeside :P that is nice and dangerous.

I have done lakeside happylaps a few time. Even before they put the cones around the back of the track to slow you down

Righto fitting coilovers to the abomination on Friday night at my place at around 5. Come around if you giys want for beers and bullshit while I fit them. Might even do a feed as well

Righto fitting coilovers to the abomination on Friday night at my place at around 5. Come around if you giys want for beers and bullshit while I fit them. Might even do a feed as well

Goes without saying but, I'm in :)

Will be supplying coronas for Chris and as I believe dalton is driving a six pack for myself, give us a text if you want some snags or anything brought up

In case you boys haven't seen the post http://www.skylinesaustralia.com/forums/topic/423450-an-evening-with-jim-richards-and-fred-gibson-18th-july/

Get onto this. Will be a great night and a great opportunity to meet the mastermind behind the R32 coming to race in Australia, and one of the drivers of these great cars. This is a rare and awesome opportunity to meet both Jim Richards and Fred Gibson. Get on this guys. I have already got the 18th and 19th off work for this and hopefully you guys will make it down also

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...