Jump to content
SAU Community

Need standard height

JaseR33

By JaseR33,
in Suspension, braking and tyres

 Share

Recommended Posts

JaseR33 Collaborator

JaseR33

Posted
Posted

Hi,

Can someone please tell me what the standard height of an R33 GTS25T is? I've seen a whiteline article that implies that it is 370mm from centre wheel to guard but have called a few suspension shops who dispute this. I'm considering getting Bilstein shocks, but am hesitant cos my height is 330mm at the moment. Need to know the height cos shocks may stuff up quick if car's too low.

Thanks

Jason

Link to comment
Share on other sites
Sydneykid Grand Master

Sydneykid

Posted
Posted

Hi Jason, the Nissan homologation papers say 370 mm standard, centre of wheel to guard when new. I usually subtract about 10 mm for initial settle in. I have never seen a truly standard one under 360 mm, so based on my experience 370 mm is correct.

As for lower, they handle best at 350/340 mm, any lower and the suspension geometry (camber change angles particularly) turn to crap. Plus you loose power through the accentuated drive shaft angles. Lower = slower.

Hope that helps

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      Rear suspension upgrades

      By Dose Pipe Sutututu · Posted

      A31 is pretty much the same thing without HiAIDS I mean CAS, no improvement lol. Not to late to send it.
    • carnoobb
      Newbies

      By carnoobb · Posted

      Thanks for all the replies! I also wanted to ask if wheels that were fitted on Ford Falcons would fit the 350GTs as well? In the area I'm at there aren't that many options for secondhand wheels and new ones here are way out of my budget. From what I've seen, most of the wheels that are available that were fitted on Ford Falcons have an offset of +33 to +36, with a centre bore of 70.5mm whereas the stock 350GT's ones are 66mm, can't seem to find any hubcentric rings that fit that difference though. 
    • sonicii
      Newbies

      By sonicii · Posted

      215/45/18 tyres are probably a little on the low side compared to the factory tyre, it should be closer to a 245/45/19, which will get you about an extra 11mm of height, and should make you speedo read a bit closer to reality. 245/45/19s will be a bit too far the other way and you risk a speeding ticket as your speedo might read slower than your actual speed.  245/40/19s would be correct if you are going to 19in rims, they will give you a similar total diameter to the 245/45/18 tyres.  
    • GTSBoy
      Rear suspension upgrades

      By GTSBoy · Posted

      That's something I forgot to put in my list. The aggressive anti-squat in R32 is a f**king menace. I still need to decide if I'm going to drag the subframe out of my car and weld in the GKTech corrector kit. The main reason to dither is the need to switch to spherical joints in the lower arm to account for the twist induced in the rear pivot caused by lowering the front pivot. And yes...we do put better subframes in R32s, and I wish I'd gotten an S14 one instead of an A31 when I did the "take off and nuke it from orbit" HICAS delete all those years ago.
    • HYBRID VL
      V37 Alarm settings and what the buttons do.

      By HYBRID VL · Posted

      I have been looking at some setting on the alarms for the Q60 and what buttons do and so and also been looking for details on the alarm in my V37 which is a standard issue with the car. settings like window roll up and a few others seem to not work at all. i cant seem to find exact info on V37 alarms so Q60 is all i can really go off i have not tried 400Z alarm settings or info yet so that will be next. any one got like a sheet of info on the alarm system in the V37 as all my documents are in japanese but i thought the system would basically be like standard through similar models? 
×
×
  • Create New...