Jump to content
SAU Community

Fs: Rb25 Hiflow Turbo, Full Exhaust System, Wolf 4+ Ecu & Other Items

NutR33
 Share

Recommended Posts

NutR33 Community Regular

NutR33

Posted
Posted

Hi Guys,

I've got my R33 GTST turbo, exhaust and computer for sale due to upgrades. It has been making 300kw for about the last 3 years and is still on the vehicle so happy to take take potential buyers for a drive. I plan to remove parts in about 1 months time when the new set up is ready, but willing to remove them earlier if sold prior to new set up arriving.

Can package and post at buyers expense, though prefer pick up on exhaust, located in Shepparton- North East Vic.

Please PM or call me on 0437 688 773.

TURBO -

R33 Hi flow turbo with OP6 rear housing.

HKS 14 psi wastegate actuator

Will bolt up to standard oil and water lines, dump pipe and intake.

The turbo was originally built by ATS in Adelaide with special exhaust and compressor wheels, not the normal hi flow wheels.

The OP6 housing was machined and fitted by Kyp at ATP in June last year and the turbo was checked over at that stage.

Turbo makes full boost by 3200-3400 RPM and is capable of 20+ Psi.

$1500

EXHAUST

3 inch CES racing split dump pipe with 2 O2 sensor ports.

3 inch gutted cat.

85mm cat back system with centre muffler and rear cannon with a 5 inch tip.

$500

COMPUTER

Wolf Version 4+ wire in

This computer is the 4+ so it has extra ignition drivers, compared to the plug in unit.

The computer comes with 30cm of loom, hand controller, instruction manual, ECU to laptop cable and software to be able to plug in and tune on your laptop.

Being a wire in unit it will suit all makes and models of vehicles, not just skylines.

$1000

Will sell Turbo, Exhaust and ECU as a complete upgrade for $2500

R34 GTR WHEEL CENTRE CAPS

Original paint in average condition.

$50

N1 GTR MAIN BEARINGS

Main engine bearings to suit R33 GTR (possibly all RB engines)BRAND NEW - Only have marks where we measured them up

Genuine Nissan parts

6x Main bearing sets

1x Thrust bearing set

These were purchased to fit my engine but we found that they were the wrong size for my engine.

If you refer to the Nissan workshop manual there are different sizes available, these are the black ones

$20

STAGEA_KING Enthusiast

STAGEA_KING

Posted
Posted

hey mate,

what else you got on the car for 300kw and the boost level you are running?

will the computer fit on auto?

how much does it cost to tune?

NutR33 Community Regular

NutR33

Posted
  • Author
Posted

hey mate,what else you got on the car for 300kw and the boost level you are running?will the computer fit on auto?how much does it cost to tune?

The boost was set to 21psi for 300Kw, the car has usualy suporting mods, intercooler, GReddy plemun, 850cc injector, cam gears.

The ECU will not run an auto trans but it could be used as a piggy back to the std ecu with the wolf controling the engine and the standard ecu controling the auto.

Im guessing it would be around $500 to tune, maybe a bit more the first time to set up all the calbrations for the sensors. Best to ring a tuner/workshop to find out

does the wolf come with a hand controller??

Yes the Wolf ECU comes with the hand controler

  • 1 month later...
  • 3 weeks later...
NUTWGN Proficient

NUTWGN

Posted
Posted

Hi Guys, Just an update price drop, all are negotiable. PM NUTR33 or myself if interested.

TURBO: $1200 ONO

WOLF ECU - $900 ONO

GTR Centrecaps - $40

Exhaust - only dump pipe and cat still available $250

N1 GTR main bearings - make an offer

  • 4 weeks later...
  • 2 weeks later...
NutR33 Community Regular

NutR33

Posted
  • Author
Posted

The Wolf ECU is a good all round ECU.

It has extra features over a power fc as it has programable outputs.

Thermo fans or anything else that you want to turn on or off can be set by any of the inputs, ie by revs, temp, boost.

You can run a wide band oxygen sensor with a display on the hand controler to check your tune while driving.

Im upgrading to the new Wolf ECU as i want some of the more advanced functions like launch control and anti-lag.

Cheers

Luke

  • 3 weeks later...
  • 2 months later...
NutR33 Community Regular

NutR33

Posted
  • Author
Posted

Hi Guys, Just an update price drop, all are negotiable.

WOLF ECU - $600 ONO

GTR Centrecaps - $40

Exhaust - $350

N1 GTR main bearings - make an offer

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • EndZee
      R33 Gts/-t Abs Module Wiring Schematic (not Gt-r)

      By EndZee · Posted

      Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...