Jump to content
SAU Community

Recommended Posts

i heard that older bmw's stuff up alot ? any BMW above 5 years has alot of problems

Find yourself a tow truck driver and ask him the most common marque he picks up and I bet it'll be BMW closely followed by Mercedes.

German reliability my arse.

Find yourself a tow truck driver and ask him the most common marque he picks up and I bet it'll be BMW closely followed by Mercedes.

German reliability my arse.

I agree with BMW being very high maintenance, have owned a few of them and have always had problems, if your are looking at a e46 coupe make sure you have the sub frame checked as these are known to crack especially the 323ci/328ci,

Mercedes and Audi have been pretty reliable, some of the cars i have had have done over 300,000 ams without major problems

Toyota/Lexus id say would be less hassle but don't really have the style of a benz etc

That is very true (basing the info for the 3 series) - plenty of design flaws from the beginning.

I suppose the only way around this is to find a BMW that has been always serviced by a BMW dealership at the correct intervals - as most of the problems would have been fixed. Usually these cars cost much more. There is no such thing as a "cheap" bmw.

iseekool is not far from the mark

Beemers are renowned for being able to plant themselves thru corners at speed and not waste fuel in the process

Since you live in the Sydney area, and if you're considering BMWs

* BMV Engineering Ph 9526.1855 at Taren Pt > Massimo is a specialist technician and great diagnostician who won't charge an arm and a leg if you decide on a Beemer

* BMWise Ph 94381669 at Artarmon > George is also meticulous and reliable without charging like a dealership

Had a E46 328Ci without problems > Have a E39 530i without problems

Our Previous Beemers had temperature/water pump/sidetank problems.

M5=awesome, but I've done some research having considered one myself and I think you'd find either E34 or E39 will be high maintenance and need a lot of attention to keep in tune.

As Terry said we've had plenty of bimmers in the past and they've been a mixed bag. All of them were six cylinders and that would be the only way to go. I've had two 325s and a 328ci before and all 3 have been good fun.

An E39 525 or 530 sport would make a great cruiser but they're auto only. Being a 5, depreciation means you could get yourself a lot of car for your money though. I know many criticise the reliability of bmws, but the E39s really were well screwed together. The cooling system *is* an Achilles heel however.

3 series would probably mean E46, still a great shape and longer scheduled servicing intervals than both te previous E36 and E39. As someone said, rear subframe cracks were a common problem. Being used to the power of your GTR I think you'd find a 323i or Lexus IS200 quite slow... A 325, 328, or 330 will offer good poke, about 7.5, 7.3, or 7.0 sec flat to 100kmh respectively for the steptronic sedans. See if you can score an '01 330ci coupe or 330i sedan which will have xenons, sunroof, leather sport seats, 17s, leccy seats with settings memorised in the key, cruise, and other nice stuff. If you can get one with sat nav that'd be a bonus as they changed from being std fit in 328ci to an option for 330ci. 8 airbags are standard for the e46.

For reference, the W210 E class of similar era were renowned for breakdowns while the equivalent BMW E39 has proved significantly more reliable. Around this time, mercedes were undergoing significant expansion in production and introducing new models, subsequently letting their quality standards slip. They've recently worked hard to turn this around

As another option a v35 would be like a budget version of a BMW coupe; you could also go an R32 Golf?

  • 1 month later...

Everything you read in mags about them is pretty true. They ok, one dimensional, but ok. I wonder how the suspension and steering bushes are coping 5 years on though.

f**k BMW out of warranty. f**k all Euro actually. And f**k gutless Lexus IS200 too! Lol, making friends aren't I :)

Have you mentioned a budget somewhere I haven't seen?

I'd probably buy the best XR6 Turbo my budget would buy. Service and repair costs will easily outweigh any perceived lack of fuel efficiency.

German reliability my arse.

It must be from people who either bought their Mercs back in the 80's, or can't believe they spent so much on so little and delude themselves even further to think they're getting actual value (rather than just the perception of it).

Modern Mercs are a shade of their former selves, BMWs have always had electrical issues, and VWs shit themselves on a regular basis too.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I've had my V36 for about a month now and have already copped an "excessive exhaust noise" notification from QLD TMR, reported by someone in my local area. It's a twin as per the original, and can have a bit of a throaty note to it when idling cold 😄 and if I do get up it a bit, it can be noisy, but it did pass a roadworthy inspection before sale, so.... ... but in the interest of being a good neighbour, I do want to quieten it down a bit. Is anyone here running a quiet aftermarket cat-back on their V36 or 370Z? And the big, bold question: does an aftermarket cat-back really make much of a performance difference on these cars?
    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
×
×
  • Create New...