Jump to content
SAU Community

any1 need discounted genuine nissan parts


bangin
 Share

Recommended Posts

Im in brissy too. Can you get the weather sheilds for cefiros? They have the old NISSAN on them, so Im guessing they are a genuine part. And are you also able to get the head light sensors once again for cefiros? If so PM me. Really I just need the passenger side sheild, but I will buy a set if thats how they are sold.

Link to comment
Share on other sites

Guest two.06l

need a lower lip for r32 gtr front bumper and black strips for tops of doors price and avail would be great. Stace Racer

Link to comment
Share on other sites

Guest two.06l
Hi

I'm after a Rb25det  

-gasket kit (whole engine not just the vrs one)

-water pump

-main and big end bearings

for a start.

PM me prices please

thanks

John

would not go to nissan for bearings. clevitte 77 are made in same factory as nismo so they are identical at 10%of the price

Link to comment
Share on other sites

  • 2 weeks later...

sorry every1 been on annual leave i can only deal with people in brisbane im sure i mentioned it before somewhere in this thread and yes its in the qld section as well. this was the original thread then i posted a thread in the qld section. sorry

just another reminder that all part info/prices to be pm to me by every friday pls and keep it simple and specific. sorry to take so long to reply and sorry to interstate users. thanks

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share



  • Similar Content

  • Latest Posts

    • thanks mate, yeah cant wait to get out there and do some laps. hopefully both of our cars can be on the track together would be an awesome sound although i would be holding you up ahahaha. 
    • What’s wrong with 2.6 first gear? I’ve done lots of 2nd gear starts from almost a dead stop and it just requires more clutch slip. A 2.6 first gear would be easier than that. I feel like the stock first gear is only good for severe traffic congestion where you need to be able to do 5 kph idling in first gear. Out in the US 120 kph is a very normal speed to be doing on the highways. If anything it’s slow, I regularly get passed by CA highway patrol doing that kind of speed. Out in the desert and plains even 18 wheelers are doing 130-140 kph. I would be less down on the Getrag if not for the fact that they cost north of 10k USD used and you’ll spend probably another 5k on a rebuild at least. I got my FS5R30A from Nissan for 1.5k USD. The cost of building one is maybe an extra 3-4k if you keep it reasonable. The final drive change to account for the 0.793 6th gear is also a pain to deal with. 
    • Usually the lower mount has a thicker/wider side, see image of the right side of the lower shock mount. Don't see why a couple of washers wouldn't do the same job.
    • Counter opinon. Having both an OS gearset car and the getrag 6 speed, will take the 6 speed for the street all day long thanks. First gear on most gear sets are ASS, the bloody gear you spend heaps of time in on the street too.   I run the 4.11 and it is fine at 110, (not sure who gets to do 120)  I do find the gears a little short and doing a 3.89 setup.    Anyway back to your question, running stock LSD rear, love it. Tried an S15 helical rear, it was aweful. In the process of doing a quaife front on advice as part of the 3.89. Seems like a good option. Let you know     Car is 800awhp and mostly street.       
    • I do the online time trials to get silver (1mil credits). Currently the EG at Tsukuba I got 1:14.015. Show me what you got! (Don't take it too seriously I only use the controller, CBF setting up G29).
×
×
  • Create New...