Jump to content
SAU Community

Recommended Posts

Hi, Wondering if anyone on here can point me in the direction of someone with a scan tool to plug into my V35 sedan?

Air bag light has started to flash and the usual reset only lasts for a day.

My local Nissan dealer usually wont touch imports.

Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/362340-scan-tool-v35/
Share on other sites

Hi Geoff this is the wrong place to be asking such advice. Post a thread in the V35 section - and in fact you will already find a topic there on it.

But I would take it to Main North Nissan if I were you - pretty sure they will service the V35 since it is so similar to the 350Z.

BTW saw your V35 in Nuri a few weeks back parked in the carpark at the park with the train in it opposite BP/Subway. Looked around for you, but couldn't find you.

Link to comment
https://www.sau.com.au/forums/topic/362340-scan-tool-v35/#findComment-5782483
Share on other sites

Thanks Andrew,

Was hoping that there may have been someone else other than a dealer that could help.

Anyone with a Carman or Launch scanner could do the job as well.

Spotted your car leaving not long after I arrived in my Ute. Missus drives the 35.

Cheers

Geoff

Link to comment
https://www.sau.com.au/forums/topic/362340-scan-tool-v35/#findComment-5782526
Share on other sites

andrew,

he's already asked me about it. told him what to look for as well. its case of finding someone dwon there with a carmen or launch to read the thing. I'm 2'5 hrs away by plane and I'm not heading that way anytime soon.

who does your svc work? (they may be able to help him :) )

in general nissan is nissan. the diagnostics haven't really changed (unless we are talking C3) on any of them.

Link to comment
https://www.sau.com.au/forums/topic/362340-scan-tool-v35/#findComment-5782530
Share on other sites

I do all my own work on the car Chris - a mechanic of any variety has not touched the thing yet.

As I said go to Main North Nissan, Craig in the spare parts division is an import supporter (he used to help me out on spares for my R34 all the time no problems), and they are an SAU:SA club sponsor (so if you joined up you would get 10% off too), so I would definitely try there Geoff.

Link to comment
https://www.sau.com.au/forums/topic/362340-scan-tool-v35/#findComment-5782570
Share on other sites

  • 2 months later...

The common problem with airbag light flashing is loss of contact in yellow conectors below passenger or driver seats. There are two of them for two safety devices that related to SRS system (in accident they will brake a lower part of seat to keep you down) Fix them and reset SRS by pedal.

http://history.nissa...FETY/index.html

http://history.nissa...MAIN/index.html

http://history.nissa...XTER/main1.html

Main North Nissan refuses to service V35 and does not matter who are you and where from.

Edited by Nicko_2010
Link to comment
https://www.sau.com.au/forums/topic/362340-scan-tool-v35/#findComment-5887191
Share on other sites

  On 05/07/2011 at 1:37 PM, Deep Dish V35 said:

i have a basic tool but have no faults to use it with hahaha

See Stewie at Ultratune, South Road Edwardstown next to GC Motorcycles.... he has a proper one

Cheers

What's the tool you're using?

Link to comment
https://www.sau.com.au/forums/topic/362340-scan-tool-v35/#findComment-5900474
Share on other sites

  On 06/07/2011 at 10:02 AM, Deep Dish V35 said:

"CAS804"..... as basic as they come

If you have an iphone or ipad...... buy the OBDII WIFI connector and download one of the OBD2 apps for realtime diagnostics :)

I did, it doesnt work unfortunately

could not connect with ECU

Edited by Nicko_2010
Link to comment
https://www.sau.com.au/forums/topic/362340-scan-tool-v35/#findComment-5900676
Share on other sites

which ABD adapter do you have?

The Kiwi PLX one has videos being used on a G35 on YouTube, and it supports both OBDII and CAN, which our car needs. I have been looking at getting one of these for some time.

Link to comment
https://www.sau.com.au/forums/topic/362340-scan-tool-v35/#findComment-5900741
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So....to find any R chassis part number, get your VIN (will be something like ER33-xxxxxx for you) and go to: https://www.amayama.com/en/genuine-catalogs/nissan and enter it. From there you have access to a web version of Nissan's part system, FAST. It is a bit tricky to get used to, so maybe have a shot and post up what you think.  You can also search by general model but note in some cases your car might have different options so VIN is safest.  On diagram 211 I got 14075-75T16 for Connector, Water Hose If I search for part 14053‑21U10 that you posted, that is also a water hose but not the one bolted to the plenum and 14075‑04U00 is the fitting where the water hose goes into the block.
    • Yeah now we are talking I much prefer coolers in the front middle because it lessens the chance of a small bump to a corner stopping the whole event. I was thinking the AT cooler can move out of the radiator, delete the AT/engine coolant interwarmer and mount a separate cooler with a thermoswitch somewhere further back as is common in racing, that would be one thing. Beyond that, the engine oil cooler is an obvious one to move to the wheel arch, potentially one on each side, but unused space is an issue. I did have a earlier pic with the bumper off but it doesn't show how busy the corners are: DS is full of the auto driving sensors and PS is totally fully of windscreen washer fluid reservoir But ultimately I was hoping to keep the AC, and the water/air heat exchanger is fundamental so it is not just the radiator that needs to be in front BTW here's airflow to the rad as it ran at the track (one horn is gone now and I'll remove the lights next time):
    • your right the maps for Australia came out in 2017 but are 2010 maps. i got the updated maps SD card put it in and it was the same. Same maps in my Brothers Nissan Patrol. 2020 i think his car is
    • Yeahhhh, the costs have killed me. Spent more than the cost of an engine rebuild and it most mostly servicing and a tune lol.
×
×
  • Create New...