Jump to content
SAU Community

Recommended Posts

As the topic says, I'm after a S2 ECU and possibly loom if anyone has one. Any 4wd NEO ecu and loom will be ok.

Cheers

Aaron

I have a 0v801 S2 for a RS4S S2 manual here, has NISTUNE fitted already. ECU, plus nistune 350 delivered..

Hmmm, very tempted.

I'm looking to wire it up to my s1 engine so I'm not sure if it'll even work at this stage. It should tho, even if I have to replace some sensors with NEO ones. From what I've heard the hardest part is getting around the traction control but I'm pretty sure the RS4S doesn't have tc. Is this correct?

Hmmm, very tempted.

I'm looking to wire it up to my s1 engine so I'm not sure if it'll even work at this stage. It should tho, even if I have to replace some sensors with NEO ones. From what I've heard the hardest part is getting around the traction control but I'm pretty sure the RS4S doesn't have tc. Is this correct?

Mine didnt have it, did have the flanges and so on on the inlet mainfold but they were never drilled.

I dont even know if the sensors ARE different, need to get someone to look at the part numbers.

Let me know anyway, it is cheap, i think its nearly 300 just for the nistune board, i bought another ECU when i had my stagea so i could swap them over, but i wrote it off so i kept the nistune ECU. Paid 120 for the ECU and then another 100 to get the board installed.

Edited by kjb_r33
  • 4 weeks later...

Mine didnt have it, did have the flanges and so on on the inlet mainfold but they were never drilled.

I dont even know if the sensors ARE different, need to get someone to look at the part numbers.

Let me know anyway, it is cheap, i think its nearly 300 just for the nistune board, i bought another ECU when i had my stagea so i could swap them over, but i wrote it off so i kept the nistune ECU. Paid 120 for the ECU and then another 100 to get the board installed.

Do you still have the ECU for sale? and what is the complete part number of it, i have a 23740 0v802 that i think is stuffed and need a replacement asap? let me know

cheers,

Do you still have the ECU for sale? and what is the complete part number of it, i have a 23740 0v802 that i think is stuffed and need a replacement asap? let me know

cheers,

Yeah, still got it, its a 23710 0v801, provided yours is a NEO rs4s it will work

Edited by kjb_r33

It's been a while as I've had other things to get done first, but I'm at the stage now where I really need to sort this ECU out. If anyone has one PM me what you want for it.

Cheers

Aaron

If you are going to the trouble of fitting a new loom why don't you fit an R33 GTST one and then you can use the much more common ecu and get a plug in Link for it or even plug in an R32 ecu and nistune that.

I think the R34 will be a better match as the r32 doesn't have VCT. I want a nistune as I can't afford any other management right now. If i was going to get something stand alone I'd wire it from scratch, but the S2 Stagea ecu will (hopefully) be mostly just pin swaps to get it to work.

You can use Z32 which does have vct in the GTsT plug but if you want an R34 one get the Nistuned one above - auto ecu will work just as well on a manual as nistune will be setting the afrs and timing anyway.

  • 2 weeks later...
  • 3 weeks later...

Hi Mate

I have a adapter loom for S1 Stagea to piggyback an R32 ECU (or Z32 ecu with a couple of wiring tweaks). It comes with an R32 ecu remapped for 550cc injectors and z32 ecu.

You can have the lot for 300. You can let the factory ECU run the vct.

Cheers

Anthony

That sounds promising, but what year is the factory ecu from? Mine is the one that was only used for 1 month of production so I doubt it'll fit, is it possible for you to check the standard Stagea ecu number for me? Is the R32 ecu nistuned?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...