Jump to content
SAU Community

Wtb. Stagea S2 Ecu

Race__24
 Share

Recommended Posts

kjb_r33 Experienced

kjb_r33

Posted
Posted

As the topic says, I'm after a S2 ECU and possibly loom if anyone has one. Any 4wd NEO ecu and loom will be ok.

Cheers

Aaron

I have a 0v801 S2 for a RS4S S2 manual here, has NISTUNE fitted already. ECU, plus nistune 350 delivered..

Race__24 Experienced

Race__24

Posted
  • Author
Posted

Hmmm, very tempted.

I'm looking to wire it up to my s1 engine so I'm not sure if it'll even work at this stage. It should tho, even if I have to replace some sensors with NEO ones. From what I've heard the hardest part is getting around the traction control but I'm pretty sure the RS4S doesn't have tc. Is this correct?

kjb_r33 Experienced

kjb_r33

Posted
Posted (edited)

Hmmm, very tempted.

I'm looking to wire it up to my s1 engine so I'm not sure if it'll even work at this stage. It should tho, even if I have to replace some sensors with NEO ones. From what I've heard the hardest part is getting around the traction control but I'm pretty sure the RS4S doesn't have tc. Is this correct?

Mine didnt have it, did have the flanges and so on on the inlet mainfold but they were never drilled.

I dont even know if the sensors ARE different, need to get someone to look at the part numbers.

Let me know anyway, it is cheap, i think its nearly 300 just for the nistune board, i bought another ECU when i had my stagea so i could swap them over, but i wrote it off so i kept the nistune ECU. Paid 120 for the ECU and then another 100 to get the board installed.

Edited by kjb_r33
  • 4 weeks later...
Brad_00 Newbie

Brad_00

Posted
Posted

Mine didnt have it, did have the flanges and so on on the inlet mainfold but they were never drilled.

I dont even know if the sensors ARE different, need to get someone to look at the part numbers.

Let me know anyway, it is cheap, i think its nearly 300 just for the nistune board, i bought another ECU when i had my stagea so i could swap them over, but i wrote it off so i kept the nistune ECU. Paid 120 for the ECU and then another 100 to get the board installed.

Do you still have the ECU for sale? and what is the complete part number of it, i have a 23740 0v802 that i think is stuffed and need a replacement asap? let me know

cheers,

kjb_r33 Experienced

kjb_r33

Posted
Posted (edited)

Do you still have the ECU for sale? and what is the complete part number of it, i have a 23740 0v802 that i think is stuffed and need a replacement asap? let me know

cheers,

Yeah, still got it, its a 23710 0v801, provided yours is a NEO rs4s it will work

Edited by kjb_r33
Race__24 Experienced

Race__24

Posted
  • Author
Posted

It's been a while as I've had other things to get done first, but I'm at the stage now where I really need to sort this ECU out. If anyone has one PM me what you want for it.

Cheers

Aaron

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

If you are going to the trouble of fitting a new loom why don't you fit an R33 GTST one and then you can use the much more common ecu and get a plug in Link for it or even plug in an R32 ecu and nistune that.

Race__24 Experienced

Race__24

Posted
  • Author
Posted

I think the R34 will be a better match as the r32 doesn't have VCT. I want a nistune as I can't afford any other management right now. If i was going to get something stand alone I'd wire it from scratch, but the S2 Stagea ecu will (hopefully) be mostly just pin swaps to get it to work.

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

You can use Z32 which does have vct in the GTsT plug but if you want an R34 one get the Nistuned one above - auto ecu will work just as well on a manual as nistune will be setting the afrs and timing anyway.

  • 2 weeks later...
  • 3 weeks later...
too_much_boost Mentor

too_much_boost

Posted
Posted

Hi Mate

I have a adapter loom for S1 Stagea to piggyback an R32 ECU (or Z32 ecu with a couple of wiring tweaks). It comes with an R32 ecu remapped for 550cc injectors and z32 ecu.

You can have the lot for 300. You can let the factory ECU run the vct.

Cheers

Anthony

Race__24 Experienced

Race__24

Posted
  • Author
Posted

That sounds promising, but what year is the factory ecu from? Mine is the one that was only used for 1 month of production so I doubt it'll fit, is it possible for you to check the standard Stagea ecu number for me? Is the R32 ecu nistuned?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R34 GTR running rich and noisy turbo coincidence

      By GTSBoy · Posted

      Put a fuel pressure gauge on it. Replace the turbos. Probably completely separate issues.
    • Dose Pipe Sutututu
      R34 GTR running rich and noisy turbo coincidence

      By Dose Pipe Sutututu · Posted

      CAS maybe?
    • silviaz
      Recomended Coolant For Gt T R34

      By silviaz · Posted

      What copper washer do you guys use on the bleeder bolts? The existing one I have I had no idea where to find it in a local store, I did buy some online but that are only 1mm thick whereas my old one is 2mm+ thick and when I put the new washer out and squeeze the top radiator hose I can hear a bit of air but not with the old one. Does this matter? The new one doesn't leak, but the inner diameter is a bit loose whereas the old one threads on the bolt.
    • donut_kng
      R34 GTR running rich and noisy turbo coincidence

      By donut_kng · Posted

      Howdy all, after being out a few weeks ago on a spirited drive in my GTR I have 2 issues that oddly have appeared at the same time. Whilst accelerating quickly through the gears all of a sudden i’ve lost power at the top of third gear (below redline around 6000rpm) for no obvious reason.    From that point onwards the car has been running rich on idle, won’t really rev under load without a ton of black smoke and the odd backfire, and dying as a pull up to a set of lights unless I keep the revs up around 1500rpm. In addition when shutting down the car that same night (I was 10 minutes from home) I noticed one of the turbos was significantly noisy on wind down when shutting off the engine. After letting the car cool down overnight it starts up fine, although once it gets to temp the revs start to creep up and down, the exhaust is darker than it should be and it also sounds like it’s running rich (fat note) I’ve put a new set of plugs in it - no change, the old plugs all seemed OK with two of them being somewhat richer/fueled up than the other 3 with 1 being borderline. I’ve smoked tested the intake system via the front of the Turbos, found a split vacuum hose going to the factory boost gauge sender, which I have since replaced.  Also found another leak on the gasket coming off the rear turbo outlet, have also replaced this. After fixing both of these leaks - still have the running rich issue. I’ve also tried another pair of AFM’s - no change here After pulling off the front turbo intake pipes, there is obvious shaft play in the front turbo, which now hisses loudly on light revvs although I can’t see why this would make the car run funny even under idle. I’m curious to know why it’s running rich before I potentially replace/rebuild turbos. The car is completely stock <50,000kms  other than an exhaust. Oil and coolant are all clear. I haven’t bothered with coil packs as it looks like they won’t be the issue due to condition of the plugs. Any help appreciated as I cry myself to sleep!
    • Rezz
      R34 4 door side skirt identification

      By Rezz · Posted

      No probs at all. I used to love trying to dig up obscure info for those in need where possible going back 20+ years on SAU.  I did have another look and couldn't come up with any closer match. I'm leaning towards those skirts in your first pic are custom fitments, cut down/extended or from another car entirely and modded to fit an R34 sedan. I would've thought someone in Japan had them and taken a photo at some stage over the last 2 decades but there's nothing. Someone out there must know surely.
×
×
  • Create New...