Jump to content
SAU Community

Recommended Posts

As the topic says, I'm after a S2 ECU and possibly loom if anyone has one. Any 4wd NEO ecu and loom will be ok.

Cheers

Aaron

I have a 0v801 S2 for a RS4S S2 manual here, has NISTUNE fitted already. ECU, plus nistune 350 delivered..

Hmmm, very tempted.

I'm looking to wire it up to my s1 engine so I'm not sure if it'll even work at this stage. It should tho, even if I have to replace some sensors with NEO ones. From what I've heard the hardest part is getting around the traction control but I'm pretty sure the RS4S doesn't have tc. Is this correct?

Hmmm, very tempted.

I'm looking to wire it up to my s1 engine so I'm not sure if it'll even work at this stage. It should tho, even if I have to replace some sensors with NEO ones. From what I've heard the hardest part is getting around the traction control but I'm pretty sure the RS4S doesn't have tc. Is this correct?

Mine didnt have it, did have the flanges and so on on the inlet mainfold but they were never drilled.

I dont even know if the sensors ARE different, need to get someone to look at the part numbers.

Let me know anyway, it is cheap, i think its nearly 300 just for the nistune board, i bought another ECU when i had my stagea so i could swap them over, but i wrote it off so i kept the nistune ECU. Paid 120 for the ECU and then another 100 to get the board installed.

Edited by kjb_r33
  • 4 weeks later...

Mine didnt have it, did have the flanges and so on on the inlet mainfold but they were never drilled.

I dont even know if the sensors ARE different, need to get someone to look at the part numbers.

Let me know anyway, it is cheap, i think its nearly 300 just for the nistune board, i bought another ECU when i had my stagea so i could swap them over, but i wrote it off so i kept the nistune ECU. Paid 120 for the ECU and then another 100 to get the board installed.

Do you still have the ECU for sale? and what is the complete part number of it, i have a 23740 0v802 that i think is stuffed and need a replacement asap? let me know

cheers,

Do you still have the ECU for sale? and what is the complete part number of it, i have a 23740 0v802 that i think is stuffed and need a replacement asap? let me know

cheers,

Yeah, still got it, its a 23710 0v801, provided yours is a NEO rs4s it will work

Edited by kjb_r33

It's been a while as I've had other things to get done first, but I'm at the stage now where I really need to sort this ECU out. If anyone has one PM me what you want for it.

Cheers

Aaron

If you are going to the trouble of fitting a new loom why don't you fit an R33 GTST one and then you can use the much more common ecu and get a plug in Link for it or even plug in an R32 ecu and nistune that.

I think the R34 will be a better match as the r32 doesn't have VCT. I want a nistune as I can't afford any other management right now. If i was going to get something stand alone I'd wire it from scratch, but the S2 Stagea ecu will (hopefully) be mostly just pin swaps to get it to work.

You can use Z32 which does have vct in the GTsT plug but if you want an R34 one get the Nistuned one above - auto ecu will work just as well on a manual as nistune will be setting the afrs and timing anyway.

  • 2 weeks later...
  • 3 weeks later...

Hi Mate

I have a adapter loom for S1 Stagea to piggyback an R32 ECU (or Z32 ecu with a couple of wiring tweaks). It comes with an R32 ecu remapped for 550cc injectors and z32 ecu.

You can have the lot for 300. You can let the factory ECU run the vct.

Cheers

Anthony

That sounds promising, but what year is the factory ecu from? Mine is the one that was only used for 1 month of production so I doubt it'll fit, is it possible for you to check the standard Stagea ecu number for me? Is the R32 ecu nistuned?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
    • Yeah, saw the ratios, not impressed. Would like the punch I have in the first gears now. With those ratios it won't be the same.  Also want the h pattern gearing, or at least a quiet gear set that don't need to come apart for service each year. Looks like the only "reasonable" way Is a 8hp70 transmission, but where is the fun in that🤷‍♂️
×
×
  • Create New...