Jump to content
SAU Community

R34 Gtr Big Brake Kit Csc

GTRsean
 Share

Recommended Posts

GTRsean Grand Master

GTRsean

Posted
Posted

I'm selling the big brake setup off my R34 GTR. Great for high performance cars, track cars of those that want to put their passengers through the front window!

It is a CSC brake setup front and rear, with 6 piston front calipers, with 356mm x 32mm rotors, and 2 piston rears.

Disc rotors are 2 piece. Adapters and bolts are included and the kit is bolt on.

Some of the features of these brakes are:

*High Strength Two Piece aluminium Calipers Heat treated and hard anodized

*Differential stainless steel piston sized to minimize pad taper

*Cast billet mounting brackets

*2 piece Rotor design with lightweight centre aluminium adapter

*Racing derived rotors with directional curved vane ventilation

*Rotors come standard with curved 24 slot design

*Uses standard master cylinder

*Uses standard brake lines (With ADR approved brake lines available)

*Two colours on offer for the Caliper colour Red or Black which are no cost options

Condition: Used, calipers in good condition, front discs were replaced 6 months ago, will need a skim or a proper strap drive setup... Rear discs seem fine.

Reason for selling: I do not have the cash to run this size of brake setup and replace discs, so I plan to get the stock brembo setup.

To suit: R34GTR, maybe R33GTR etc, anyone that can afford to run this setup lol. Minimum wheel size is 18 inch.

Price: $2500SOLD

Please PM if interested.

Pickup prefered, or I can deliver in Syd area.

All pics are of actual brakes on my car with 18's.

post-12712-0-78817400-1304169659_thumb.jpg

post-12712-0-68013400-1304169669_thumb.jpg

post-12712-0-06750700-1304169679_thumb.jpg

post-12712-0-41149000-1304170712_thumb.jpg

post-12712-0-60813400-1304170727_thumb.jpg

post-12712-0-65161900-1304170760_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/362651-r34-gtr-big-brake-kit-csc/
Share on other sites
Import Monster Mentor

Import Monster

Posted
Posted

have this exact kit on one of my cars - excellent kit and this is a very good buy - I'd jump on it myself if I didn't already have them

FYI - to run the fronts on a 32/33 then you need to enlarge the mounting holes on the hub (32/33 I think are 12mm, 34 is 14MM) or just get the appropriate dog bone adapters from Access.

Good luck, don;'t think this will last long :)

  • 8 months later...
GTRsean Grand Master

GTRsean

Posted
  • Author
Posted

Okay, back up for sale....

See the price?, I lowered it! it's a bargain!! :closedeyes:

Will charge a little less (like $2000) if traded with 34GTR non vspec, or 34GTR vspec 1 rear calipers in great nick...

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Butters
      UniClutch

      By Butters · Posted

      Well they got my money but they are not getting my gearbox ! 
    • GTSBoy
      ECU sees many times the speed than speedo does (R34 swap)

      By GTSBoy · Posted

      It's needed for rolling idle up, and I think it is a decider on VCT also.
    • Kinkstaah
      ECU sees many times the speed than speedo does (R34 swap)

      By Kinkstaah · Posted

      I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...