Jump to content
SAU Community

Brand New Hks Exhaust Manfold Set - Rb26Dett

Blitz
 Share

Recommended Posts

Blitz Grand Master

Blitz

Posted
Posted

Hi all,

I am selling of my new set of Genuine HKS Stainless Exhaust Manifolds to suit R32/R33/R34 GTR

HKS Exhaust Manifolds are absolutely top shelf items and the best Japanese aftermarket exhaust manifolds you can buy - These are brand new in the box and have only been opened up for the purpose of taking a photo.

Part Number: 1419-RN001

post-46-0-60988900-1304247405_thumb.jpg

Retail on these from Nengun is ~$1800.00 + Shipping and Tax so well over $2000.00 to replace.

http://www.nengun.com/hks/exhaust-manifold-stainless

I have inadvertently ended up with two sets as I got impatient and picked up another set in Sydney while I waited for these to come from Japan so I need these gone quickly to recoup some costs.

In the interests of a quick sale I am asking $1300.00 - Yes, you read correctly, that is a $700.00 saving on buying them yourself from Nengun!!

No low ballers, no time wasters - First in best dressed.

Located in Sydney, pickup available and happy to post if needed.

Thanks.

Deano 1 Mentor

Deano 1

Posted
Posted

these look like a nice bit of gear, do you no if people have probs with these cracking like the Tomei ones? also how they fit up? can you still run the same oil and water lines as factory? turbos sit in the same position?

very interested

Blitz Grand Master

Blitz

Posted
  • Author
Posted

these look like a nice bit of gear, do you no if people have probs with these cracking like the Tomei ones? also how they fit up? can you still run the same oil and water lines as factory? turbos sit in the same position?

very interested

They sit in the factory position and are direct fit replacements for the factory manifolds so the fit is perfect.

They are extremely well made and if anything are better quality than the tomeis so provided your tune is correct and your EGT's arent through the roof like some cars using E85 for example, you will be fine.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • brillo
      Leak from Tokico BM50 Brake Master Cylinder

      By brillo · Posted

      Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      PXL_20250828_063541093.TS.mp4
    • Gantai
      R33 GTST Steering Rack (49001-19U05) Rebuild?

      By Gantai · Posted

      Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • PranK
      R35 GT-R production ends after 18 years

      By PranK · Posted

    • SteveL
      Leak from Tokico BM50 Brake Master Cylinder

      By SteveL · Posted

      I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...