Jump to content
SAU Community

Recommended Posts

I run a k&n panel in mine.. Feels like it can breathe ally better.. and also it's a one off purchase and then afterwards u can just clean them.. I found because they slightly oiled.. When u blow them out with the air gun most the crap comes out pretty easy and back to new again.. But thats my opinion.. Others could feel differently..

Link to comment
https://www.sau.com.au/forums/topic/363696-panel-filters/#findComment-5803761
Share on other sites

I've heard from various mechanics and some users that the oil based air filters are not good for our engines,

hence, K&N is not good for the VQ engine is what I've been hearing.

that's why I started this topic.

i'm currently in usa, temporarily. K&N filters cost around $40-$50 brand new but I am hesitant to purchase it for that reason.

The Trust Airinx GT are not available here, they can be shipped from JPN for around $85 USD after doing some ressearch.

so I just wanted opinions on what you guys know about them.

thanks for the replies so far,

i will be waiting for more !!

Link to comment
https://www.sau.com.au/forums/topic/363696-panel-filters/#findComment-5803980
Share on other sites

I've heard from various mechanics and some users that the oil based air filters are not good for our engines,

hence, K&N is not good for the VQ engine is what I've been hearing.

that's why I started this topic.

i'm currently in usa, temporarily. K&N filters cost around $40-$50 brand new but I am hesitant to purchase it for that reason.

The Trust Airinx GT are not available here, they can be shipped from JPN for around $85 USD after doing some ressearch.

so I just wanted opinions on what you guys know about them.

thanks for the replies so far,

i will be waiting for more !!

After a few read-throughs online, alot have different opinions.

Pros:

1. Good lifespan, if cleaned and oiled properly.

2. Allow the engine to breathe better then a standard paper filter (Oil is there to attract the dirt).

3. Small gain in power (Depends on the type of engine), if you also change the piping, throttle body, etc.

4. Save money in the long run.

Cons:

1. If not oil and clean properly, it will have bad effects on the engine.

2. Abit of work in cleaning it and re-using process.

So I am abit confussed now as well. :wacko:

Link to comment
https://www.sau.com.au/forums/topic/363696-panel-filters/#findComment-5804540
Share on other sites

Technically the oil is not bad for the engine it's more to do with our air flow meter.. As it's designed to read air and not oil..

But yes you do run a risk.. But what mod out there, is there that doesnt have side affects or carry risk.. No guts no glory.. Cant expect everything our way..

Link to comment
https://www.sau.com.au/forums/topic/363696-panel-filters/#findComment-5804626
Share on other sites

Technically the oil is not bad for the engine it's more to do with our air flow meter.. As it's designed to read air and not oil..

But yes you do run a risk.. But what mod out there, is there that doesnt have side affects or carry risk.. No guts no glory.. Cant expect everything our way..

Jo, you are spot-on on that fact.

I shouldn't have said engine. My bad. :P

Edited by VNS 24
Link to comment
https://www.sau.com.au/forums/topic/363696-panel-filters/#findComment-5804654
Share on other sites

Im not a fan of the k&n anymore, i have never had an issue but heard too many stories of oiled up AFM to want to run one again. Id look at a dry type like the greddy. Can get the nismo, mines etc etc. but they are pretty much identical to the greddy in construction but 3 times the price. Greddy seems to be pretty good price wise these days. I have seen them on nengun for around $40+ shipping. So it would end up more around $60 direct from japan, with current exchange rates. Obviousley price will vary with exchange rate etc.

Link to comment
https://www.sau.com.au/forums/topic/363696-panel-filters/#findComment-5805396
Share on other sites

I've heard from various mechanics and some users that the oil based air filters are not good for our engines,

hence, K&N is not good for the VQ engine is what I've been hearing.

that's why I started this topic.

i'm currently in usa, temporarily. K&N filters cost around $40-$50 brand new but I am hesitant to purchase it for that reason.

The Trust Airinx GT are not available here, they can be shipped from JPN for around $85 USD after doing some ressearch.

so I just wanted opinions on what you guys know about them.

thanks for the replies so far,

i will be waiting for more !!

Bah, K&N filters are fine :rolleyes: . Don't over oil them (follow the instructions) and you'll be fine.

Been using a K&N without issue for more than a year in my NM35 Stagea now, VQ engine; AFM in exactly the same position.:thumbsup:

They flow stacks more air than a STD filter, and filter more effectively if oiled correctly.

Link to comment
https://www.sau.com.au/forums/topic/363696-panel-filters/#findComment-5805609
Share on other sites

Bah, K&N filters are fine :rolleyes: . Don't over oil them (follow the instructions) and you'll be fine.

Been using a K&N without issue for more than a year in my NM35 Stagea now, VQ engine; AFM in exactly the same position.:thumbsup:

They flow stacks more air than a STD filter, and filter more effectively if oiled correctly.

Yeah, that would be the main issue for me.

As I've never used K&N panel filters before, I am not that confident to clean it myself yet. I will only install it "AFTER" I make sure my mechanics know about it. Hope it's not too hard or complicating. :P

So Dale, you don't get any AFM problem so far? Do you clean the filter yourself with ease?

Edited by VNS 24
Link to comment
https://www.sau.com.au/forums/topic/363696-panel-filters/#findComment-5805763
Share on other sites

Yeah, that would be the main issue for me.

As I've never used K&N panel filters before, I am not that confident to clean it myself yet. I will only install it "AFTER" I make sure my mechanics know about it. Hope it's not too hard or complicating. :P

So Dale, you don't get any AFM problem so far? Do you clean the filter yourself with ease?

Absolutely no issues. Takes about 10 min to clean using a Filtercharger kit, wait for it to dry, re oil, done.

Link to comment
https://www.sau.com.au/forums/topic/363696-panel-filters/#findComment-5805805
Share on other sites

not to too much of topic but before i sold the car i had a k&n typhoon complete cai system and it was wonderful, and i think it was worth the pretty penny that was spent on it, i dont know about power it gave though but it did make a good noise and just made the engine and car a bit more lively. and past about 4000 rpm it sounded very nice and if you tap the accel you could hear a little sucking sound very very similar to a turbo (had been mistaken a few times for one lol) but nothing to douchebaggy like a fake BOV on a NA

Link to comment
https://www.sau.com.au/forums/topic/363696-panel-filters/#findComment-5806301
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...