Jump to content
SAU Community

Recommended Posts

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

no spam, looking around. work in the insurance industry and want to understand the skyline scene a bit more

Hmm insurance industry, maybe you could help me with something and then ill be your friend =D

Have you ever seen a claim rejected for minor things such as:

- Tint being below 35%

- Modifications which are legal but are not declared to the insurance company.

- Minor modifications such as having a pod or uncovered intake/which is illegal but no one gets defected unless they are being an ass to the cop

- Driving a prohibited vehicle for P plater's, EG turbo

- Someone lied when signing up to their insurance company about their accident history or license suspensions

-Also do all insurance companies share a database with information on everyone about previous claims etc???

Please dont tell me yes you "will" have your claim denied for the above things. I want to know if you have ever seen claims denied or reduced for the above thing.

THANKSSS

Link to comment
https://www.sau.com.au/forums/topic/363699-friends/#findComment-5804239
Share on other sites

Hi friends...

How do I make friends with people on this forum????

I am new to the skyline world and really want to go fast.

Help???

xxx

Dear Friend, My name is Sgt.Joey Jonse. I am an American Soldier serving in the military ofThe 1st Armored Division in IRAQ for The United States, we have about $25Million American dollars here which Is in our Possession and we are ready tomove it out of the country. My partners and I need a good partner someone we can trust to actualizethis Venture the money is from oil proceeds and legal, but we are movingit through diplomatic means to your house directly or a safe andsecured location of your choice using diplomatic courier services But can wetrust you? Once the funds get to you, you take your 40% out and Keep our own 60%.Your ownpart of this deal is to find a safe place where the funds can be sent to. Ourown part is sending it to you. If you are interested I will furnish you withmore details, awaiting your urgent response.You're Buddy.Sgt.Joey Jonse

Link to comment
https://www.sau.com.au/forums/topic/363699-friends/#findComment-5804246
Share on other sites

jawrgy - you will be declined every claim you make

and edit - I think this new person is being a troll to troll you

call your company mate and dont listen to this person!

next thing you'll get a PM saying come for a ride on my BMX!!

Link to comment
https://www.sau.com.au/forums/topic/363699-friends/#findComment-5804251
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...