Jump to content
SAU Community

Recommended Posts

Hey Guys,

I have been around these forums for ages, but never joined so sorry about my first post being so big. I have a 96 gts-t with a rb26 single turbo conversion. The problem is that it is not making the power that I think it should for the money I have spent. Also I have a problem with boost control, my car seems to run stupid boost and make no power. There are talks that the wastegate is to small. The car has made 330rwhp at 22 psi with the following (see below). The car made 210 rwkw at 8pound at 5000 when the motor was being run in so I was expecting big things but at the moment am very disappointed. Am I expecting to much??? Can you see a problem with the build. What would you guys expect the car to make. RNZ11s I raced you when you had the 30/40 setup you might remember my car???

Rb26

Garret 30/40 700hp ball bearing turbo

Port and polish – JHH

Cam gears

Boshe 044

Sard 700cc injectors

Wisco forged pistons – Teflon coated

Shot peened and linished rods arp bolts

HKS Intercooler all piping hpc coated

Turbomsmart pro gate 42 m

Turbosmart super sonic valve

Standard plenum

Halteck ek6

Boost control is just a t-piece.

Thanks for you help!!!

  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

ur wastegate seems fine

but things to do would be

1. get a better boost controller or even wastegate controller

2. get a decent tune

with these to things - mainly the 2nd one u should c it close to 300rwkw easy

It might help if you could post a dyno readout. I'm no real expert with your particular set up but an RB26 with those mods...wow! I'd be expecting alot more too. Just wondering about the ECU & tune?? Does it run MAP or AFM's? Maybe this calls for Doughboy or SydneyKid....ring ring, brrrr, ring ring :rofl:

Boost control is just a t-piece.

What the......................?

Clearly you have spent buckets on a tough rebuild so how could you possibly overlook the boost controller?

1. Get a REAL boost controller

2. Get another tuner.

The problems is I am sick of spending money to recieve the results I am getting. My thinking is spend 700 bucks to find out that it is not a boost problem, does that make sense. So many people have had a look and don't know what is going on. Getting over it.

As a guide, My GTR made 360rwhp or 270rwkw with Stock Motor, Apexi PFC, Cam Gears, Boost @ 15psi, & exhaust. Running stock fuel pump...etc etc wish I could help, love to see your end result sounds like an animal.

Ditto - 33GTR, same mods minus the PFC and same power

help: You need a good tuner

Hmm, seems wierd. I would be looking at your exhaust side, as already mentioned. If you are winding more boost in, with little return, it sounds like back pressure to me, or the turbo is well out of its efficiency range. If its a 700hp turbo, I think I would be correct in assuming the turbine AR is reasonably large, so I doubt any restriction is there.

try dropping the exhaust and take the car for a quick squirt (or better still put it on the dyno) - takes only a few minutes to drop. You do run a 'racing' cat dont you?

I had a nismo exhaust, that started choking the car at around 285rwkw, changed to a super dragger and made boost alot earlier, and got alot more top end - now making well over 300rwkw (on a 480hp turbo:) sorry just had to throw that one in:p)

take a good close look at your bov too - I have seen those turbosmart supersonics leak like a sieve, try putting you hand over the oulet whilst at idle. If it is leaking, you may still be making boost, but the car will be alot more lethargic off boost, and ramp slower onto boost instead of hitting hard.

Steve,

If "racing" is hollow then answer is yes. Then only reason I changed valves is cause apparently the apexi one I had was leaking to. Valves are annoying to say the least. I am not so much winding more boost in it just does what it wants, we got it a bit lower 18 pound and moved some of the solinoids for the haltec as my mechanic thought they may be fighting the standard ones for a signal. The car felt a little stronger with less boost. I will try and get a graph sent the guy who tuned the car is supposed to be looking after me cause I did some work for his so I will see what I can get. Thanks for telling me that my car makes crap power when I sought it out you will be the first to see the dyno graph :)

The problems is I am sick of spending money to recieve the results I am getting. My thinking is spend 700 bucks to find out that it is not a boost problem, does that make sense.

but that 700 you probably are well advised to spent IMO.

a good controller is probably one of the most important parts.

Aside from that... what AR is your Ex housing?

I find it pretty hard to believe this is caused by a boost controller

I was asking about your exhaust to get a gauge of what manifod / turbine housing you were using. Also with your ECU how much timing are you giving it throughout the maps? Is it pinging? A car isnt gonna make any power with 5 billion pound boost but **** all timing.

Need more details.

something doesn't seems right there could be anything from a blocked fuel filter to crappy mappings, Things like these take time especially in a conversion when all things are removed and the refitted in best possible way.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
    • Not yet quite as bad as what we've seen a Jim Berry clutch do in an R32 GTR though when it decided to cut a chassis rail in half... Still very very gnarly and a great reason to avoid.
×
×
  • Create New...