Jump to content
SAU Community

Recommended Posts

hey dude i have a good condition steering wheel here if you're interested, it has the centre bit as well

thanks dude let us know the price.

could you also see if there are any of the sun visor clips, that go on the ceiling?

Edited by Socrates

Yer I'm gunna put a drift wheel on it, only cause I like the off center feel and they are perfectly round... Well I rang him today and he doesn't doesn't have any center cOnsole lids but he tolde to ring a bloke in Windsor apprently he has some L28 motors and some other stuff, so I'll see how I go there... Also do u have a spare boss kit for the c210?

you can get a boss kit from repco/ supercheap. you just have to wait like 2 weeks.

be careful though. the metal ring for the horn on the base of mine came off and the horn went nuts. i had to pull over and unplug the horns (loud). also chewed out the mechanism that centers the indicators when straightening the wheel and started to smoke lol. so maybe like remove it and re-glue before installing or just remove.

you can get a boss kit from repco/ supercheap. you just have to wait like 2 weeks.

be careful though. the metal ring for the horn on the base of mine came off and the horn went nuts. i had to pull over and unplug the horns (loud). also chewed out the mechanism that centers the indicators when straightening the wheel and started to smoke lol. so maybe like remove it and re-glue before installing or just remove.

Alrighty man cheers for the heads up... ill see how i go, ill just go down and order a boss kit tomorrow.

Having been down this path myself: single carby to 260Z carbs, to SU canbs to triple webers, 3 different gearboxs, 3 engines, 3 sets of suspension, 6 years of dicking about etc, I'd give you this advice: choose a plan, and stick to it.

Your SU's are going to bolt straight up to what you have and the car will go about twice as fast, except for the fact that they are likely to need a rebuild (think about a grand).

There is no manifold for 2 sidedraft webers - they won't fit on your twin SU manifold, so unless your budget stetches to 3 webers, manifold, linkages, filters and tuning (think about $2,000 - 3,000 min, and then more for a retune if you change the engine later).

Extractors and exhaust, great idea.

5 speed, cool!

Lightened flywheel, sure. Think about a fresh heavy duty clutch too.

Aftermarket drift steering wheel... err... gross, but whatever turns you on.

8 inch Watanabes... no chance in hell, unless you are planning on cutting the guards up and finding and over-guard flare kit out of Japan. Budget, what... $2,000 if you go for decent looking copies.

Adjustable suspension... again, entry-level King springs and shocks are going to start at a grand. If you are just crusing why do they need to be adjustable?

Basically, budget about $10,000 to $15,000 for the work you're describing, or stick on the SU's, exhaust and 5 speed and lower springs for about a 7th of that, or buy a smashed Datsun 280zx and bolt up the complete injected L28 etc and go about as fast as you would with the SU's, again for a fraction of the cost. You'll probably want to put aside more money for bushes, bearings and brakes.

Good luck, it's a lovely car.

Hey guys just a few pics of my c210 atm as im about to start puttin it together this is how it sits atm and ill update this topic as i go...

wat i have to go in:

Twin Su carbs

5-Speed transmission

2in exhaust

Aftermarket Steering Wheel

Lightend Flywheel

What i have on the to buy list:

Twin webbers

Ajustable suspension

EFI conversion

Extractors

Wantanabes RS8 16x7, 16x8

Most of what I want to do is over time but ur pretty much on the money, also alot of what I'd like to do won't happen but a guy can aim for the sky lol I want adjustable suspension for height and stiffness... It will be along time before I'm done with this car and will never sell it as it was my granddads and he bought it brand new. thanks for the advice I appreciate it!

Having been down this path myself: single carby to 260Z carbs, to SU canbs to triple webers, 3 different gearboxs, 3 engines, 3 sets of suspension, 6 years of dicking about etc, I'd give you this advice: choose a plan, and stick to it.

Your SU's are going to bolt straight up to what you have and the car will go about twice as fast, except for the fact that they are likely to need a rebuild (think about a grand).

There is no manifold for 2 sidedraft webers - they won't fit on your twin SU manifold, so unless your budget stetches to 3 webers, manifold, linkages, filters and tuning (think about $2,000 - 3,000 min, and then more for a retune if you change the engine later).

Extractors and exhaust, great idea.

5 speed, cool!

Lightened flywheel, sure. Think about a fresh heavy duty clutch too.

Aftermarket drift steering wheel... err... gross, but whatever turns you on.

8 inch Watanabes... no chance in hell, unless you are planning on cutting the guards up and finding and over-guard flare kit out of Japan. Budget, what... $2,000 if you go for decent looking copies.

Adjustable suspension... again, entry-level King springs and shocks are going to start at a grand. If you are just crusing why do they need to be adjustable?

Well said Drew..

wait what about the paint and panel job???

:w00t:

Basically, budget about $10,000 to $15,000 for the work you're describing, or stick on the SU's, exhaust and 5 speed and lower springs for about a 7th of that, or buy a smashed Datsun 280zx and bolt up the complete injected L28 etc and go about as fast as you would with the SU's, again for a fraction of the cost. You'll probably want to put aside more money for bushes, bearings and brakes.

Good luck, it's a lovely car.

If i were you id want to leave it stock as a rock, its too nice to change! (wish i did this to my first one) and buy another one that has already been modifed. should work out cheaper,

You'll be able to buy one with a few goodies already on it for a few grand and you will be able to keep this one as good as your grandad kept it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
    • List all of your mods. It sounds like an aftermarket ECU hitting rev limiter. Like a valet mode, or a cold rpm limiter? 
    • @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
×
×
  • Create New...