Jump to content
SAU Community

Recommended Posts

post-10298-0-19337400-1305955438_thumb.jpgpost-10298-0-96917200-1305955402_thumb.jpgpost-10298-0-85232700-1305955358_thumb.jpgpost-10298-0-01135800-1305955310_thumb.jpgpost-10298-0-83223800-1305955260_thumb.jpgpost-10298-0-34293900-1305955220_thumb.jpgpost-10298-0-72673400-1305955183_thumb.jpgpost-10298-0-48529300-1305955137_thumb.jpgpost-10298-0-14864200-1305955092_thumb.jpgpost-10298-0-78892700-1305955046_thumb.jpgpost-10298-0-52370000-1305955000_thumb.jpgpost-10298-0-86863700-1305954953_thumb.jpgpost-10298-0-75352000-1305954903_thumb.jpgpost-10298-0-93252400-1305954857_thumb.jpgpost-10298-0-80580400-1305954808_thumb.jpgpost-10298-0-48529300-1305955137_thumb.jpgpost-10298-0-14864200-1305955092_thumb.jpgpost-10298-0-78892700-1305955046_thumb.jpgpost-10298-0-52370000-1305955000_thumb.jpgpost-10298-0-86863700-1305954953_thumb.jpgpost-10298-0-75352000-1305954903_thumb.jpgpost-10298-0-93252400-1305954857_thumb.jpgpost-10298-0-80580400-1305954808_thumb.jpgpost-10298-0-20072000-1305954756_thumb.jpgpost-10298-0-07068000-1305954715_thumb.jpgpost-10298-0-30546800-1305954668_thumb.jpgpost-10298-0-54472200-1305954623_thumb.jpgpost-10298-0-62710400-1305954579_thumb.jpgpost-10298-0-82897900-1305954545_thumb.jpgpost-10298-0-39487000-1305954505_thumb.jpgpost-10298-0-14494700-1305954456_thumb.jpgpost-10298-0-70356400-1305954401_thumb.jpgpost-10298-0-27054400-1305954340_thumb.jpg

Guys i have a heap things here that I no longer need. All the stuff to put together a high hp 26/30 "on the cheap" some parts will suit just a 30 or a 26.Preity much every thing needed to build a motor up -just need a decent head gasket and big end bearings and a few other bits.

HKS Pro L stage cams - little use as I went bigger - $800 - bargain, Rb 26 used water pump nothing wrong with it $50,N1 Oil pimp - $100, Custom catch can with internal baffles $50, used set of Scat rods and Ross forged pistons, set of Argo h beams- one new the rest used ,a couple need little end sleave bushed, Cp pistons and rings all Ok except there are a couple of pins missing, rings , New Mahle oversized RB 30 pistons , fly cut for valve releaf , i piston cut wrong - all will make a cheap build on a forged motor $1250, rb 26 sump and diff with new sump baffle $180,044 external bosch fuel pump as new$120,near new over flow bottle with bottom relief $30, Farea in and ex valves ,retainers collets, heavy valve springs $200, RB26 cam buckets a couple of sets,$130, custom billet fuel rail twin entry to suit large injectors , nead a couple of tabs welded on as I cut of to fit 2 side by side, $60,stock R32gtr ECU $50-, HKS cam pulleys $130, RB26 crank$100 RB 30 crank $100 , turbo RB30 block $100, 2 x stagea auto box's- good clutch packs $400 ea, 26 head thats ported properly , has seen 800 hp , has pin hole in #1 and needs welding there and on the rear water jacket- has cam caps to suit $200. Standard 26 engine mounts$30, a couple of Oxy sensors -$40 ea plus other stuff.

Prefer to sell the lot in one go $2k - be quick!

PM me

Link to comment
https://www.sau.com.au/forums/topic/365053-rb2630-parts-or-cheap-build/
Share on other sites

post-10298-0-19337400-1305955438_thumb.jpgpost-10298-0-96917200-1305955402_thumb.jpgpost-10298-0-85232700-1305955358_thumb.jpgpost-10298-0-01135800-1305955310_thumb.jpgpost-10298-0-83223800-1305955260_thumb.jpgpost-10298-0-34293900-1305955220_thumb.jpgpost-10298-0-72673400-1305955183_thumb.jpgpost-10298-0-48529300-1305955137_thumb.jpgpost-10298-0-14864200-1305955092_thumb.jpgpost-10298-0-78892700-1305955046_thumb.jpgpost-10298-0-52370000-1305955000_thumb.jpgpost-10298-0-86863700-1305954953_thumb.jpgpost-10298-0-75352000-1305954903_thumb.jpgpost-10298-0-93252400-1305954857_thumb.jpgpost-10298-0-80580400-1305954808_thumb.jpgpost-10298-0-48529300-1305955137_thumb.jpgpost-10298-0-14864200-1305955092_thumb.jpgpost-10298-0-78892700-1305955046_thumb.jpgpost-10298-0-52370000-1305955000_thumb.jpgpost-10298-0-86863700-1305954953_thumb.jpgpost-10298-0-75352000-1305954903_thumb.jpgpost-10298-0-93252400-1305954857_thumb.jpgpost-10298-0-80580400-1305954808_thumb.jpgpost-10298-0-20072000-1305954756_thumb.jpgpost-10298-0-07068000-1305954715_thumb.jpgpost-10298-0-30546800-1305954668_thumb.jpgpost-10298-0-54472200-1305954623_thumb.jpgpost-10298-0-62710400-1305954579_thumb.jpgpost-10298-0-82897900-1305954545_thumb.jpgpost-10298-0-39487000-1305954505_thumb.jpgpost-10298-0-14494700-1305954456_thumb.jpgpost-10298-0-70356400-1305954401_thumb.jpgpost-10298-0-27054400-1305954340_thumb.jpg

Guys i have a heap things here that I no longer need. All the stuff to put together a high hp 26/30 "on the cheap" some parts will suit just a 30 or a 26.Preity much every thing needed to build a motor up -just need a decent head gasket and big end bearings and a few other bits.

HKS Pro L stage cams - little use as I went bigger - $800 - bargain, Rb 26 used water pump nothing wrong with it $50,N1 Oil pimp - $100, Custom catch can with internal baffles $50, used set of Scat rods and Ross forged pistons, set of Argo h beams- one new the rest used ,a couple need little end sleave bushed, Cp pistons and rings all Ok except there are a couple of pins missing, rings , New Mahle oversized RB 30 pistons , fly cut for valve releaf , i piston cut wrong - all will make a cheap build on a forged motor $1250, rb 26 sump and diff with new sump baffle $180,044 external bosch fuel pump as new$120,near new over flow bottle with bottom relief $30, Farea in and ex valves ,retainers collets, heavy valve springs $200, RB26 cam buckets a couple of sets,$130, custom billet fuel rail twin entry to suit large injectors , nead a couple of tabs welded on as I cut of to fit 2 side by side, $60,stock R32gtr ECU $50-, HKS cam pulleys $130, RB26 crank$100 RB 30 crank $100 , turbo RB30 block $100, 2 x stagea auto box's- good clutch packs $400 ea, 26 head thats ported properly , has seen 800 hp , has pin hole in #1 and needs welding there and on the rear water jacket- has cam caps to suit $200. Standard 26 engine mounts$30, a couple of Oxy sensors -$40 ea plus other stuff.

Prefer to sell the lot in one go $2k - be quick!

PM me

Hi Mate,

Where are you?

Im interested in the lot.

Ha - the only one with any brains so far, I dont really want to break up but people want individual items, fair enough though. Any way , perth WA - w R U?

Even found amulti layer head gasket and a couple of copper ones as well - they will come with the gear, there is a shift light as well, all has to go

Im in Sydney, makes it a bit hard. Good luck

Cam gears, 040 and fuel rail gone.

Rods still on pistons x 2 sets and 1 x set of Argo's and Mahle RB pistons still for sale. HKS Pro L/s are a bargain if youn need big flow.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
×
×
  • Create New...