Jump to content
SAU Community

Recommended Posts

  • 4 months later...

I know this isn't a car damage story, but it's a VicRoads incident all the same.

After the bushfires, the only thing that survived on my property was my steel gate & fence line. Anyhow, VicRoads decided to do some maintenance on the roadside verge a couple of weeks after the bushfires (go figure). They dropped a tree across my fence - my only surviving asset!! You can imagine my disappointment, considering we were traumatised by the fires and eager to get back on our feet again - with this careless piece of maintenance setting us back one step.

To cut a long story short - we lodged a complaint and they basically said bad luck. Initially they blamed the volunteer groups, then some other department, then we got in touch with a VicRoads representative for the bushfires. She said she'd look into it, but basically don't count on it (based some sort of legislation which I couldn't find). I felt like asking how she'd feel if I drove through ther front fence and said "bad luck, refer to the legislation".

We complained and chased the representative every second day for months and months. My wife and I took turns in hassling them. I only claimed bare minimum materials & bugger all labour. They eventually paid up after a VERY looooong time.

Hint: If you get a name, keep records, and the slightest hint of compensation - you gotta play the game and be persistent, really persistent.

And in the long run if its not a large sum of money (in which case they'll never pay up anyway) is it really worth waiting 'months and months' for a payout that may or may not happen? This is the question.

And in the long run if its not a large sum of money (in which case they'll never pay up anyway) is it really worth waiting 'months and months' for a payout that may or may not happen? This is the question.

It got to be a battle of principle in the end. The amount of avoidance was frustrating. We eventually got our money.

That, and the insurance company playing funny buggers just made it our job to try and recover all the money we were owed.

It can't be a battle of principles when your car is off the road. I argued with vicroads for four months with my car off the road and undriveable until I had to make the call because I needed the car back and working. It took a further 3 months of labour to fix the damn thing. Had I kept arguing or taken them to court I likely still wouldn't have anything more than a broken car in my basement.

No. Their process via notice of incident and claim is you send them a quote. They sit on their hands and think for a bit and then tell you they're not liable for any damage caused in part or wholly by road conditions. And that I quote almost verbatim. Oh...and you have to submit all of your paperwork within 30 days of the incident.

Once I got offered $3k. I said no way. Five years later and $20k of lawyer fees I got $126k. Gotta keep at em and make em pay. Federal legislation over rides any company/local government policy.

maybe in WA.. this is Vic..

but 126k and you still drive a 33? lol

It was South Australia. There is better stuff to spend that amount of money on than cars.

true, but you'd think one thing to spend it on is to update an aged car. surely..

His point still stands. The Victoria part.

damn straight. fkn victoria. the place to wee

I agree with you blokes totally about the vic laws. Just because someone has a 500 hp car doesn't mean they will hoon in it. Most cars will break the speed limit and burn rubber. It the drivers discretion entirely what the car does. What can ya do tho? Move to WA if you have to. Only difference here is that you don't get hassled by cops. No doubt you'd get busted for being a hoon but that isn't the point.

You'd be surprised what people will do when they are starting to think that they will lose in court and have to pay your lawyers bill. They usually give in. It just takes time and commitment. And make sure you have a legally winable case or you will lose your money and time. A lawyer will tell you if you can win for a fee. At worst you lose a few hundred dollars and fix your own car. Eh what can I say? It sucks to live in vic.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...