Jump to content
SAU Community

Recommended Posts

$6000 ONO

IF I DONT SELL IT I'LL JUST KEEP IT AS ORIGINALLY INTENDED

NOW THIS IS A REPAIRABLE WRITE OFF , WAS WRITTEN OFF WELL BEFORE NEW RULES CAME OUT.

IT IS SMASHED ON THE LH A PILLAR SO GUARD AND DOOR, FRONT WINDOW ALSO CRACKED

ALSO RH SIDE DOOR AND SILL UNDER DOOR AND REAR QUARTER

DEFINATLY REPAIRABLE

STILL STARTS DRIVES TURNS ALL THAT

CLEAN ON THE INSIDE , NEEDS LOVING ON THE OUTSIDE!

HAS FACTORY ZENNON'S ON THE FRONT

1998 R34 GT WELL STARTED OUT AS A GT , CURRENTLY TURBO

2006 COMPLIANCE

37000 KMS

HAS A R34 GTT TURBO CONVERSI0N FITTED TO THE RD25DE ENGINE

HAS A BUILT 4 SPEED AUTO WITH A 3200RPM STALL CONVERTER TAKES OFF LIKE A SLINGSHOT VERY VERY FIRM SHIFTS

R34 GTT DIFF

KONI ADJUSTABLE SUSPENSION ALL ROUND

ADJUSTABLE UPPER AND LOWER ARMS

X FORCE CAT BACK EXHAUST

18 INCH LENSO'S

BLITZ DUAL SBC

BLITZ FATT TURBO TIMER

FRONT MOUNT AND POD FILTER ALSO

THERE IS PROBABLY MOORE I HAVE MISSED

PM FOR MORE INFO OR CALL TOM 0403392718

Link to comment
https://www.sau.com.au/forums/topic/365811-r34-skyline-repairable-write-off/
Share on other sites

no offence meant here but there is AT least 8-10K of damage there if you are paying someone to fix it. that is good for a parts car unfortunately.

no offence meant here but there is AT least 8-10K of damage there if you are paying someone to fix it. that is good for a parts car unfortunately.

8-10 grand?

You must get ripped in QLD then

Thanks for your un requested comment

  • 1 month later...

Habibi Repair Special...

This car wouldn't drive straight after that accident damage - no matter what you did to it.

You must use a poor quality panel beater or be one yourself if you think you can’t repair that correctly to drive straight again.

A bit of time and skill goes along way......

Habibi Repair Special...

This car wouldn't drive straight after that accident damage - no matter what you did to it.

Ah just shows some people have no idea!

Edited by burko1

You must use a poor quality panel beater or be one yourself if you think you can't repair that correctly to drive straight again.

A bit of time and skill goes along way......

and I agree but unless you crawled under it physically and looked at how bent it was both of us would only be speculating. I persoanlly figure that the front laft A pillar is bent, the side panel inner support , door and sill need doing at a guess new there is easily $3k or so in new parts.

I pointed this car out to a mate of mine that buys them ex japan and he's still said it would be better to strip than repair. maybe thats what the new oncer wants with it.

Noneed for Brian to crawl under it.it's on my hoist for him to walk under and suss out.

It's not that bad but I do have another shell lines up to donate some straight sections from.

It'll never see the road again though, I didn't buy it with that intention.

Edited by Risking

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...