Jump to content
SAU Community

Recommended Posts

Nope, not really.

Slightly less rear end grip on corners, near enough to the same when taking off, You can rotate the tyres and get a longer life out of em. Wider rears will also reduce grip slightly in the wet. Only things i can think of either way really.

8s aren't a bad size either consitering the stockers are 6.5 wide all around.

There was an interesting article in the latest issue of Sport Compact Car, don't know if you guys get that magazine down under. They were trying to make a 350Z corner at 1g. They found that the conventional wisdom of suspension tuning that car (with big wide rims in the back and whatever will fit in the front) to result in an unbalanced car, even if you tuned the resulting understeer out it just didn't feel right. They ended up fitting the widest rims and tires under the front arches that they could, and using the same width at the rear. Between that, some sway bars, and some sticky tires, they got their 1g - and a nice balanced handling feel.

Moral of the story is that tire width should be matched to your weight distribution if you're looking for optimum handling. Wide meats in the back work well for a 911 or an Esprit. Skyline is close enough to 50/50, so use the same width front and back.

Cheers

Jason

I use larger at the rear on the same size rims (235 and 255) due to the incredible front traction I have with my current setup. The fronts are Continental Sportcontact 23540ZR17 and the rear are 25540ZR17 Goodyear Eagle F1 of the very latest release and they juuuuust control the oversteer nicely.

I think all 4 wheels the same would always be the best, but usually there is a compromise between size, grip, cost etc.

The only reason to put smaller wheels on the front is if the bigger size on the rears wouldnt fit, or if you wanted to save money.

Your 8 would go well on your 32, ive got 17x8 with 225 on the front and 17x9 on the rear with 235 on my 32 and they look and feel good, but my rears do rub sometimes (as there is only 1cm clearance from guard to my tyre), but only over big bumps.

I think all 4 wheels the same would always be the best, but usually there is a compromise between size, grip, cost etc.

The only reason to put smaller wheels on the front is if the bigger size on the rears wouldnt fit, or if you wanted to save money.

Your 8 would go well on your 32, ive got 17x8 with 225 on the front and 17x9 on the rear with 235 on my 32 and they look and feel good, but my rears do rub sometimes (as there is only 1cm clearance from guard to my tyre), but only over big bumps.

I was under the impression that a GT-R has to have the same size front and back unless you have a torque splitter?

LW.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Shit thing to find eh? I guess the big issue is that whatever "fix" you do now, it might slow the rust down but won't fix it. I just wanted to add that in no way is fixing sheet metal in 3 dimensions the place to start with welding....that is a pro only job because its too hard to work out where things should be, let alone doing a clean enough job that it can look OK and still be strong too.  I needed to get a new rear quarter panel on the GTR and it took a pro weeks to get the old one off cleanly, new one on in the right place and looking somewhat like it should have with most of the previous connecting panels in place. Gluing a couple of bits of metal together with a welder in the garage is doable, but that is totally different to doing panel  replacement
    • This seems to be a very popular swap since all the turbo skyline prices went through the roof! I'll let someone more familiar chime in, but I understand that yes you probably want to swap the loom in to swap out the auto TCM stuff. You should not assume everything just plugs in either, you need to check at least the ECU wiring diagram for any differences at the plug at the left headlight and probably the ones near the ECU that join the dash loom too  
    • hows it fellas, my first post here which seems crazy cos half the forums i read are like the same age as me haha. to make a long story short ive got an r34 sedan (rb25de neo auto) which im swapping to a s0/s1? rb25det, r33 big box and nismo gt pro lsd. i have the motor and gearbox all bolted up outside the car, old motor and trans out. i bought the motor with stock ecu and loom, do i switch over to that? or will it be easier to get a r34 manual ecu and keep the loom if thats even possible.  also engine mounts look different, anything else thats different or incompatible? cheers, hope this all makes sense Paddy
    • att.4QNbuJlz_gNZPFBGFqeEvxSUHXkGt7z40V59MrtXTPg.mp4    
    • Plan on the day will be to park trackside. Depending on space availability we will try put a small shade tent and a few of the cars on top of the hill inside turn 3, this is an easy to get to parking area with views of Turn 2, Turn 3, Turn 4 and Turn 5 and limited other pieces of the view around the track. IMPORTANT NOTE! One consideration from previous years is from memory the trackside parking sells out before the admission tickets, for that reason I encourage anyone planning on coming to buy tickets for parking now via the official website; https://www.worldtimeattack.com/ The type of parking you are looking for is 2 Day Park & View (Access Around Venue) Vehicle Pass Only Please note this does not include admission to the event itself, remember to grab that also, and kids under 12 get in for free!
×
×
  • Create New...