Jump to content
SAU Community

Recommended Posts

Aberax has, so has Heslo I think

-D

Yup, I had my block/crank/piston machine work done there at Rhemac, all up was around $2.2k. I think Helso had head work done there also. I know Lewis Engines do head porting for about $1200, so if anything is go by, then Rhemac will be more expensive. If you give Rhemac a call on 08 8522 2588 and speak to any of the guys there, they can help you - I dealt with Peter.

Ive had 2 heads built, one RB25det and one RB26dett, with all the fruit

They were through Boostworx who outsourced the work, happy with the results in both cases.

Ask Shaun @ boostworx for a quote?

on both ocasions my cost was about a grand for the head porting/polishing work

in both cases I supplied cams and cam springs, the rest was left to the machinist to recondition/replace as necessary

rb25det - tomei poncams & springs

r32 rb26dett - greddy R34 cams & HKS camsprings, r34 cas

for both engines Im using basic "areospeed" (ebay) adjustable cam gear pulley wheels, exhaust only on Rb25 and the pair (exh/in)for the Rb26

the pull from the Rb26 is insane! and thats on a runin tune only, with stock turbos (steel wheel rebuilds).

very happy with the work performed. ask around for a quote.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...