Jump to content
SAU Community

Recommended Posts

Hey guys, so my 32gtr is still giving me grief and I have absolutely no idea how to begin the trouble shooting process. I have the complete service manual and basic tools.

I am wondering If there is a gtr savvy member living around the maylands area who is interested in spending a few minutes answering questions and having a look at my car(try and get it going properly) for the price of a carton of their choice. I have read through hundreds of threads on this and other gtr sites(Canada gtr is also very good) but have not managed anything solid.

Cheers in advance guys. Here's hoping. :)

Jesse.

Link to comment
https://www.sau.com.au/forums/topic/366889-anyone-keen-to-help-for-a-cost/
Share on other sites

  • Replies 180
  • Created
  • Last Reply

Top Posters In This Topic

Well it's very similar to the problem benno2 was having, started her up and let it idle for a few minutes to warm. Cruised slowly around the block(probly 1k) then, going up a slight hill the revs started dropping even though I was still accelerating. They progressively dropped all the way down and the was almost stalling on a rough idle. Totally confused I killed the ignition not wanting to do more damage. About 4 hours later I tried starting it and it started with a regular idle but a bit low and drove back here with

What felt like slight power loss.

What do u guys think? Mass air flow? Hopefully not gasket? Is this a turbo fault?

I'm moving from a 96 v8 fairmont so this is allllll new to me.

Thanks all.

By the way I'm located right by maylands traino.

Jesse.

Ok, so I just pulled my top Afm out to have a looksi.. Previous master has obviously already resoldered our connections here. This is the joins, sorry they're upside down.. :P

cfc0a840.jpg

dfb4f2d2.jpg

And this is what I assume is the O2 sensor.

07642c77.jpg

3e35baf2.jpg

Very oily/dirty.

What do we think guys?

Thanks for the input. And Boss-Zilla, this is pretty much all I've done so far.

Jesse.

thats the hotwire of your AFM and its filthly lol that will probly be your problem (o2 sensor is in you dump pipes after the turbo), spay it with some electrical contact cleaner, DO NOT touch it with anything, next thing is to figure out where that oil came from.

Edited by horrace

That is the hot wire (sensing) element in the airflow meter, O2 sensor is in the turbo dump pipe.

And that looks like a shitload of oil on the afm, look up the cleaning DIY and see how it goes.

Got a catch can?

Edit: beat me to it horrace!

Just need to clarify, really I meant an oil/air separator.. contains baffles etc and is used to scrub oil from the air before returning it to the intake stream. Always a good thing on a boosted, legal, recirculating breather setup.

A catch can just catches any oil that may come out the breather and is a safety measure required in some racing, usually used in atmo breathing setups (and in recirc setups by people who bought cheap catch cans off ebay).

Jesse, to me it sounds like a vaccum leak and another possibility is intake manifold gasket leaking.

Have a look in the workshop manual for the vaccum layout, will show you all the hoses - make sure they are all good.

To search for leaks in intercooler piping and manifolds, grab a can of Aerostart or similar and with the engine running, spray around all the joints in the cooler piping and intake manifold - if the revs pick up you've found your leak.

Oh dear, most of the vacuum hoses look like this; (these are top and bottom turbo control solenoid hoses respectively)

9126f7f9.jpg

b0c17282.jpg

I'm about to go get some aerostart to test em but I think they will all need help soon. At least if I can get it driving ok I can get it to a mech.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...