Jump to content
SAU Community

Recommended Posts

Well as the title suggests this is about a ATi 6950 1gb the 2gb was out of stock (MSY) will flash it to a 6970 later just doing some benchmarks before it gets flashed for some comparisons

CounterStrike Source

old cards 4850 1gb crossfire OC version

263 fps average in the stress test

6950 1gb

364 fps avg.

Dirt 3

i forgot to do a stress test with my old setup but it was only running possibly medium 1920x1080

new one all settings as high as they could go

Max Avg 57.11 fps

Min Avg 48.51

Link to comment
https://www.sau.com.au/forums/topic/367351-ati-6950-1gb/
Share on other sites

LOL Steve - SIF CS:S is a proper test :D

I find the reviews from most sites to be very much spot on the money.

If you really want some great reviews - www.xtremesystems.org

Those guys are right on the pulse and do some VERY involved testing, when im building a PC, its where i read for a month before purchasing :)

Link to comment
https://www.sau.com.au/forums/topic/367351-ati-6950-1gb/#findComment-5859852
Share on other sites

Ash ;) they are comparative back to back though

just finished 3d Vantage test

>>Old Score P13438 3DMarks<<

>>New Score P15364 3DMarks<<

all in all for the $225 spent i feel it has been a good upgrade now to sell the old crossfire setup

Link to comment
https://www.sau.com.au/forums/topic/367351-ati-6950-1gb/#findComment-5859881
Share on other sites

I know, just stirring you up. Use a game that stresses a card :P

I used to play the 1st level of a game or something and try follow a similar pattern etc and log stuff.

Its always nice to see the improvements of money spent.

Something easily done with a GPU over any other part thats for sure

Link to comment
https://www.sau.com.au/forums/topic/367351-ati-6950-1gb/#findComment-5859882
Share on other sites

oh just reading you can only flash a 6950 to a 6070 in the 2gb variant as there was no 1gb 6970

ah well i could still over clock if its not fast enough or buy another and crossfire it

This is right on the money.

Sofresh only managed to do it because he has the 2gb rev1 version.

Basically, he got lucky because he got in relatively early.

Sucks about MSY not having stock of it, but even if they did it would probably have been a rev2 which can't be flashed either.

Well, not to a 6970 but it can get really upgraded clock speeds.

GL with overclocking that badboy.

Link to comment
https://www.sau.com.au/forums/topic/367351-ati-6950-1gb/#findComment-5860139
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Make sure you drop the GTT base tune back in, and set your injectors again, this will remove anything playing up with it you may have removed. Possibly lean there as it's normally a fast transient going THROUGH atmospheric pressure, and a turbo motor would then quickly go richer as boost builds. The only worry you MIGHT have is ignition timing, as the DE is higher compression than the DET from memory. But again, you're not in boost, so the DE motor will be a lot more forgiving at atmospheric.   Get Murray, Kinkstahs, and Johnny's input on tuning haltechs, those guys have played with tuning enough in the past to be able to help now you're past the trouble shooting stage of the MAP issue
    • @Rusty NutshI mate. Do you have a pinout diagram for the na neo auto ecu? 
    • Yeah thats the plan now. 🤞
    • Have a chat with the tuner, you'd want to drive the car straight there.
    • My mechanic installed all the parts and then got it tuned which i think is around the corner from him
×
×
  • Create New...