Jump to content
SAU Community

Recommended Posts

I noticed yesterday that my clutch is leaking a lot of fluid from where the shaft (the one kinda attached to the clutch pedal) goes into the master cylinder.

I'm guessing a seal is gone, but can anyone offer up any advice asap. Is there anything I can try short of taking it somewhere because I'm a bit short on funds atm :

Thanks

46n2

Link to comment
https://www.sau.com.au/forums/topic/36757-help-asap-cluch-leaking-fluid/
Share on other sites

  • 2 weeks later...

Funnily enough - I found that exact problem today as well. I have clutch fluid dripping down onto the clutch pedal and the floor. It's not leaking very fast but I had to top up the fluid today - I caught it when it was about 2mm from the bottom of the fluid reservoir.

46n2 - is the fluid leaking inside the car like mine?

MearCat : Yeah, it's leaking inside the same as yours :D I've spoken to a few ppl and they think i'll be in need of a new master cylinder. I'm holding off for a few days to confirm. I'll post back and let u know...

46n2

  • 2 weeks later...
  • 4 weeks later...
  • 7 months later...

nooooo. $250 ouch....

in future guys.....

go to your local clutch place. and ask for a rebuild kit. should be about $10.

it will be a rubber seal. then you just replace the rubber seal on yours. and bolt it back in.

thats all that is needed to be done. i had a problem on mine and i solved it this way.

if you dont want to go to the hassel of rebuilding it...

i have got a spare one i'd sell.

it doens't leak. i doubled up when i didn't know what to do...

hehe...yeh i've got the same problem.....always a wet patch on my floor mat under

clutch pedal...and refillin the clutch master cylinder every couple of weeks.....

anyways...like dabigbolf said....i went and got a rebuild kit from nissan...

only cost me $40..

kit contains complete piston, return spring, piston stop ring, o-ring and the boot - all brand new....

if you going this way best idea is to give the cylinder a nice honing to insure the seal beds

in smoothly..

$250 is a bit steep....so $40 and a lil diy is ALOT lighter on the wallet......

Clutch Master Cylinder.

$250 is a bit of a RIP.

I bought mine for around $60-$70 from a local brake/clutch shop in St. Mary's.

It is made by PBR.

I may be able to dig up some old photo's of the box & part number.

Bl4ck32 also recently replaced his and knows the exact price as I replaced mine 2.5years ago.

Also guys remember when taking on the $40 kit rebuild option - IF your master cyl has scores in the bore it will need to be re-sleved or replaced which will end up costing you more money in the long run.

So before you buy the kit - it may be a good idea to take the master cyl off and taking it to a clutch place for assesment before spending your money.

I have encounterd the same problem on another car we had used that was 15 years old and from japan.

Does the clutch slip when powering down from 1st to 2nd when you shift really fast, once you back off quickly ( when you noticed its slipping ) .and give it gas it stops slipping ?

If thats the case, your stopper for the clutch pedal can be the problem.

petar.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello Liam - HA - somewhere in flies - possibly I have an update, but I have been so busy, projects have taken a back seat to getting business back on track.  I will let you know the outcome, but I think I am going to go for the 8HP,  CHEERS.  ELVIS
    • Thanks Joshuaho96, yes - as someone else also suggested, the 8HP seems the 'smart choice' - HA - and ZERO to do with cost, but I am sure 8 speeds will be better than 6 speeds - HA - maybe.  I will purchase a new 8HP,  Thanks.  ELVIS.
    • Nobody said anything about getting a "...cheap Falcon box..."- it was JUST a question about a specific transmission.  And YOU may have a problem with not enough $ - HA - I do NOT - so please keep your comments like you are some financial guru to yourself.  BUT - much appreciated re the cost of a new 8HP and I twill probably be the way I go.  Thanks.  ELVIS.
    • Most people I know in the BMW world are swapping 6HPs for 8HPs. The 6HP has a big issue with one of the clutch drum bushings wearing out shockingly early which leads to them going into limp mode going into 5th/6th gear as the oil pressure loss from the worn bushing causes clutch slip. Even with the adaptations in shifting the TCU can't bump line pressure enough to keep the clutches from slipping and burning. I've personally looked at a 335d with 6HP28 with one owner and ~90k miles on it and the transmission adaptations were way out of spec and even though it nominally drove ok I'm confident it would have needed a full rebuild sooner than later. Other than that they're fine, but the 8HP doesn't really have weird issues like this to my knowledge and they're in everything these days so pulling them out of crashed cars isn't too hard.
    • There is an ABS pump and a few solenoids. You could trigger the front/rear solenoids with a pressure bleeder attached with a Consult 2. 
×
×
  • Create New...