Jump to content
SAU Community

Recommended Posts

Hey guys just thought i'd list my pride & joy for expression of interest as i'm wanting something different for drift, will be more then happy to sell the rolling shell for the right price as i'd rather put the running gear (e.g engine, gear box, ecu & loom) into something more suitable for drift

So as you all know its a hr31 passage gt 1988

All mod plated for the 25 conversion with rego till the 10th month

Rb25/30det made 306hp on 14psi, engine still has alot hp left in it, as the turbo is out of flow "maxed out" if you where to wack a garret gt3076 or gt35/40 turbo on it will crack over 400hp easy

Tuned by EFI performance

Wolf 3d v4+ computer with hand controller

Tdo6 turbo with high-mount manifold

50mm external wastegate with screamer

2 stage boost controller 8psi & 14psi

The head is series 2 rb25det turbo head with an internal oil mod to run the VCT

JD customs forward facing plenum

Xf throttle body

550cc injectors

super spark coilpacks

mild head work & porting

Hks multi-layer steel (MLS) head gasketThe rb30 block was built by ERD engines in brisbane

Arp head studs

ACL race bearings

Genuine nissan piston ring kit through it

Arp con rod bolts

Balanced & cyro block

Gtr n1 oil pump

Crank collar

Chemically cleaned

52mm radiator with thermo fan

Front mount intercooler "600x300x70"

full 3" inch exhaust system from turbo back

Oil cooler with oil relocation kit, easy access to oil filter

Series 2 rb25det 5 speed manual gear box

Exedy heavy duty clutch x2

Custom 2 piece tailshaft

R200 diff "LSD" diff gears are 4.375 (might be a 2way but not 100% sure)

Bosch external fuel pump with holly lift pump into the 2L surge tank

Fuel regulator

Battery relocated to the boot (new battery)

S3 front end, "turbo" ti grill, projector head light

Afterburners with "turbo" garnish

MDU coilovers all round s13 conversion up the front with 8kg springs, 10kg springs in the rear

Passage blue interior in great condition

Comes with a set of 16" inch rays volt racing wheels

Hicas has been removed & bushes have been put in place

Turbo timer

Jvc head unit with kicker 6x9's & 6" alpine's in the front

Overall this car is in awesome condition, the 2 front guards do have some small damage but i do have 2 new ones to replace, just need to be painted

Asking around 10k

I got loads of pictures of the build so if you want anymore just request what you want.

Any questions please just ask, fell free to come check it out

Located on the gold coast

Cheers luke

IMG_0357-2.jpg

IMG_0395.jpg

IMG_0334.jpg

IMG_0372.jpg

IMG_0364.jpg

IMG_0293-1.jpg

IMG_0288.jpg

IMG_0303.jpg

IMG_0308.jpg

photo-1.jpg

Link to comment
https://www.sau.com.au/forums/topic/367652-306hp-rb2530det-hr31-passage-gt/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...