Jump to content
SAU Community

Recommended Posts

Ok so im changing my setup on my r33 series 1 and i have a whole bunch of performance parts that im not going 2 need and there just taking up space in my garage

Microtech lt12s with plug in adapter around $700

Big cc injctors with rail and adapter and malpassi fuel reg not sure on the cc think around 800cc with only about 3000km on them around $600

Exedy twin plate clutch practily brand new less than 500km on it cost me like 2500 around $1000

5speed manual with just under 80 000kms on it shifted perfect no noises or knocks $1300

eagle forged conrods with only 3000km run in ks $400

standard intake manifold $50

stainless steel top mount manifold with external wastgate unknown brand fitted but not plummed bak 2 exhaust manifold is warped and would require maching $100

standerd exhaust manifold $50

High energy sump $150

Blitz sbc dual solinoid boost controller $100

and various rb25det enging parts and acesseries

Im located in Keilor downs victoria 3038

if u have any question or need other random r33 parts and 4 prices feel free 2 call or message me(chris) 0432165542 my garage is like a wreckers at the moment and there is so many parts that have built up over time i havent even got room 4 my car so have 2 clear it out asap.Also if you wont pics of any parts txt me and ill send them 2 ya

Edited by chrisr33gtst
Link to comment
https://www.sau.com.au/forums/topic/368341-r33-gtst-performance-parts/
Share on other sites

Ok so im changing my setup on my r33 series 1 and i have a whole bunch of performance parts that im not going 2 need and there just taking up space in my garage

Microtech lt12s with plug in adapter around $700

Big cc injctors with rail and adapter and malpassi fuel reg not sure on the cc think around 800cc with only about 3000km on them around $600

Exedy twin plate clutch practily brand new less than 500km on it cost me like 2500 around $1000 SOLD

5speed manual with just under 80 000kms on it shifted perfect no noises or knocks $1300 SOLD

eagle forged conrods with only 3000km run in ks $400

standard intake manifold $50 SOLD

stainless steel top mount manifold with external wastgate unknown brand fitted but not plummed bak 2 exhaust manifold is warped and would require maching $100

standerd exhaust manifold $50

High energy sump $150

Blitz sbc dual solinoid boost controller $100 SOLD

and various rb25det enging parts and acesseries

Im located in Keilor downs victoria 3038

if u have any question or need other random r33 parts and 4 prices feel free 2 call or message me(chris) 0432165542 my garage is like a wreckers at the moment and there is so many parts that have built up over time i havent even got room 4 my car so have 2 clear it out asap.Also if you wont pics of any parts txt me and ill send them 2 ya

Edited by chrisr33gtst

Ok so im changing my setup on my r33 series 1 and i have a whole bunch of performance parts that im not going 2 need and there just taking up space in my garage

Microtech lt12s with plug in adapter around $700

Big cc injctors with rail and adapter and malpassi fuel reg not sure on the cc think around 800cc with only about 3000km on them around $600

Exedy twin plate clutch practily brand new less than 500km on it cost me like 2500 around $1000 SOLD

5speed manual with just under 80 000kms on it shifted perfect no noises or knocks $1300 SOLD

eagle forged conrods with only 3000km run in ks $400

standard intake manifold $50 SOLD

stainless steel top mount manifold with external wastgate unknown brand fitted but not plummed bak 2 exhaust manifold is warped and would require maching $100

standerd exhaust manifold $50

High energy sump $150 SOLD

Blitz sbc dual solinoid boost controller $100 SOLD

and various rb25det enging parts and acesseries

Im located in Keilor downs victoria 3038

if u have any question or need other random r33 parts and 4 prices feel free 2 call or message me(chris) 0432165542 my garage is like a wreckers at the moment and there is so many parts that have built up over time i havent even got room 4 my car so have 2 clear it out asap.Also if you wont pics of any parts txt me and ill send them 2 ya

Hey mate of memory the microtech lt12s didnt need its own map sensor it uses the cars standed sensors .It dosent use the airflow meter so u can remove that and it comes

with the plug and play adapter for a skyline loom.So as simple as plug it in hook 1 manifold presure line then drive it to tuner

Ok so im changing my setup on my r33 series 1 and i have a whole bunch of performance parts that im not going 2 need and there just taking up space in my garage

Microtech lt12s with plug in adapter around $700 SOLD

Big cc injctors with rail and adapter and malpassi fuel reg not sure on the cc think around 800cc with only about 3000km on them around $600 SOLD

Exedy twin plate clutch practily brand new less than 500km on it cost me like 2500 around $1000 SOLD

5speed manual with just under 80 000kms on it shifted perfect no noises or knocks $1300 SOLD

eagle forged conrods with only 3000km run in ks $400

standard intake manifold $50 SOLD

stainless steel top mount manifold with external wastgate unknown brand fitted but not plummed bak 2 exhaust manifold is warped and would require maching $100

standerd exhaust manifold $50

High energy sump $150 SOLD

Blitz sbc dual solinoid boost controller $100 SOLD

and various rb25det enging parts and acesseries

Im located in Keilor downs victoria 3038

if u have any question or need other random r33 parts and 4 prices feel free 2 call or message me(chris) 0432165542 my garage is like a wreckers at the moment and there is so many parts that have built up over time i havent even got room 4 my car so have 2 clear it out asap.Also if you wont pics of any parts txt me and ill send them 2 ya

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I thought Australia got rid of the "drag dodgy fuel up to 91 RON with ethanol", which is why all E10 advertise as "up to 94 RON" ? Anyway I put E10/91 in the missus' Mazda because she empties the tank weekly, when all my cars get 98RON. tl;dr - turbo - 98 RON, if you can't afford that, sell it and get a commuter car (or tune your car for 91, which no one does).
    • Yeah i found that alot of parts can be wrong or "very" hard to get the real right one. I already bought some brakes years ago on me "old" GT calipers and they were wrong too 😄  I told them too. Even send them pictures...but they said "EBC catalogue has them on my car... So i dont know what their answer will be. I call monday them and let them know that they are really not on my car. If they were they would be already on a car...
    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
×
×
  • Create New...