Jump to content
SAU Community

Recommended Posts

Ok so im changing my setup on my r33 series 1 and i have a whole bunch of performance parts that im not going 2 need and there just taking up space in my garage

Microtech lt12s with plug in adapter around $700

Big cc injctors with rail and adapter and malpassi fuel reg not sure on the cc think around 800cc with only about 3000km on them around $600

Exedy twin plate clutch practily brand new less than 500km on it cost me like 2500 around $1000

5speed manual with just under 80 000kms on it shifted perfect no noises or knocks $1300

eagle forged conrods with only 3000km run in ks $400

standard intake manifold $50

stainless steel top mount manifold with external wastgate unknown brand fitted but not plummed bak 2 exhaust manifold is warped and would require maching $100

standerd exhaust manifold $50

High energy sump $150

Blitz sbc dual solinoid boost controller $100

and various rb25det enging parts and acesseries

Im located in Keilor downs victoria 3038

if u have any question or need other random r33 parts and 4 prices feel free 2 call or message me(chris) 0432165542 my garage is like a wreckers at the moment and there is so many parts that have built up over time i havent even got room 4 my car so have 2 clear it out asap.Also if you wont pics of any parts txt me and ill send them 2 ya

Edited by chrisr33gtst
Link to comment
https://www.sau.com.au/forums/topic/368341-r33-gtst-performance-parts/
Share on other sites

Ok so im changing my setup on my r33 series 1 and i have a whole bunch of performance parts that im not going 2 need and there just taking up space in my garage

Microtech lt12s with plug in adapter around $700

Big cc injctors with rail and adapter and malpassi fuel reg not sure on the cc think around 800cc with only about 3000km on them around $600

Exedy twin plate clutch practily brand new less than 500km on it cost me like 2500 around $1000 SOLD

5speed manual with just under 80 000kms on it shifted perfect no noises or knocks $1300 SOLD

eagle forged conrods with only 3000km run in ks $400

standard intake manifold $50 SOLD

stainless steel top mount manifold with external wastgate unknown brand fitted but not plummed bak 2 exhaust manifold is warped and would require maching $100

standerd exhaust manifold $50

High energy sump $150

Blitz sbc dual solinoid boost controller $100 SOLD

and various rb25det enging parts and acesseries

Im located in Keilor downs victoria 3038

if u have any question or need other random r33 parts and 4 prices feel free 2 call or message me(chris) 0432165542 my garage is like a wreckers at the moment and there is so many parts that have built up over time i havent even got room 4 my car so have 2 clear it out asap.Also if you wont pics of any parts txt me and ill send them 2 ya

Edited by chrisr33gtst

Ok so im changing my setup on my r33 series 1 and i have a whole bunch of performance parts that im not going 2 need and there just taking up space in my garage

Microtech lt12s with plug in adapter around $700

Big cc injctors with rail and adapter and malpassi fuel reg not sure on the cc think around 800cc with only about 3000km on them around $600

Exedy twin plate clutch practily brand new less than 500km on it cost me like 2500 around $1000 SOLD

5speed manual with just under 80 000kms on it shifted perfect no noises or knocks $1300 SOLD

eagle forged conrods with only 3000km run in ks $400

standard intake manifold $50 SOLD

stainless steel top mount manifold with external wastgate unknown brand fitted but not plummed bak 2 exhaust manifold is warped and would require maching $100

standerd exhaust manifold $50

High energy sump $150 SOLD

Blitz sbc dual solinoid boost controller $100 SOLD

and various rb25det enging parts and acesseries

Im located in Keilor downs victoria 3038

if u have any question or need other random r33 parts and 4 prices feel free 2 call or message me(chris) 0432165542 my garage is like a wreckers at the moment and there is so many parts that have built up over time i havent even got room 4 my car so have 2 clear it out asap.Also if you wont pics of any parts txt me and ill send them 2 ya

Hey mate of memory the microtech lt12s didnt need its own map sensor it uses the cars standed sensors .It dosent use the airflow meter so u can remove that and it comes

with the plug and play adapter for a skyline loom.So as simple as plug it in hook 1 manifold presure line then drive it to tuner

Ok so im changing my setup on my r33 series 1 and i have a whole bunch of performance parts that im not going 2 need and there just taking up space in my garage

Microtech lt12s with plug in adapter around $700 SOLD

Big cc injctors with rail and adapter and malpassi fuel reg not sure on the cc think around 800cc with only about 3000km on them around $600 SOLD

Exedy twin plate clutch practily brand new less than 500km on it cost me like 2500 around $1000 SOLD

5speed manual with just under 80 000kms on it shifted perfect no noises or knocks $1300 SOLD

eagle forged conrods with only 3000km run in ks $400

standard intake manifold $50 SOLD

stainless steel top mount manifold with external wastgate unknown brand fitted but not plummed bak 2 exhaust manifold is warped and would require maching $100

standerd exhaust manifold $50

High energy sump $150 SOLD

Blitz sbc dual solinoid boost controller $100 SOLD

and various rb25det enging parts and acesseries

Im located in Keilor downs victoria 3038

if u have any question or need other random r33 parts and 4 prices feel free 2 call or message me(chris) 0432165542 my garage is like a wreckers at the moment and there is so many parts that have built up over time i havent even got room 4 my car so have 2 clear it out asap.Also if you wont pics of any parts txt me and ill send them 2 ya

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • We have a huge update coming in the next few months, version 5 of Invision will be released. I'm holding off any changes until after this change as I'm not sure what features will be removed or introduced.
    • Yeah, plenty of air flow, there is a dedicated path that feeds the air in to the OEM intake tube behind the bumper As for a "tangible effect", maybe, but getting the pod/intake air out of the hot engine bay is worth it psychologically to me, even if it gives no performance difference, so the tangible effect in my Lizard brain saysss yessss  In the end, to me a tangible effect isn't always about performance, sometimes it a sound or a look, or even a...... feeling  Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga
    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
×
×
  • Create New...