Jump to content
SAU Community

Recommended Posts

Hey guys,

I am new to these forums, and new to owning a skyline.

I got it just over a week ago, and it has an aftermarket headunit in it, which is a pioneer unit from japan. It has a CD and cassette to replace the double din. It also has 4 Pioneer 6.5s (2 door 2 back). When I put a CD in and turn it up to max volume, there is barely any sound coming out of the speakers, there IS sound, you can definitely hear it, it's just really low.

A mate suggested that the head unit could be the problem, what do you skyline enthusiasts think?

I plan on replacing the head unit this week, using the guides I have found here.

Link to comment
https://www.sau.com.au/forums/topic/368364-sound-system-volume-problem/
Share on other sites

sounds dodgy for sure, maybe a grounded speaker .frame using up the power, amp section burned out on the deck. not upping the watts to the proper levels,

attenuation turned on

interior sound mic turned on, high noise = high volume, low noise = low volume some decks have that

does the fader work ?

i take it the fm radio is loud ? if so the deck has the sound EQ for the cd setup on I would suss. ? pioneer uses different eq and sound settings for cd and radio on some radios

wouldnt worry until you ditch the deck, then check the speakers "OHM" load. but if they have a capacitor or xover network you can see mixed numbers other then 4-8ohms

get a installer to do the work, or you might be in for more then you bargain for , a quick fix for a pro or days of ripping your hair out on the forums your choice ?

and welcome to the skyline world, and get a ADR approved alarm first /asap

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey keep the ideas coming, I'm always keen on projects! But, problem fixed!  I got a cheapie ozito scope from Bunnings and had a good look in and around the bearing and sensor hole. I couldn't see a smoking gun but the bearing looked a bit strange, especially when comparing with a new one. I thought the cover had come off the bearing magnets.  Sorry for pics of a screen, I didn't have an SD card.     Good thing I had the old one to inspect. So, given I'm like a pit crew with wheel bearings and luckily I had a spare bearing because I f**ked up my parts order, I decided to just smash it out. Got the old one out in about an hour. So much easier when the parts haven't had a chance to rust together yet. 😂 And, well, found the problem.    In the second pic at about the 8 o'clock position, you'll see what I think is the tip of the old sensor.  The new sensor has definitely been rubbing but it's all intact, just a little shiny so I'm hoping it's fine.  The car brakes perfectly now and no errors.  I think the job took about 2.5h in the end. 👍🏻 I really appreciate the help in here as usual. Thanks guys.
    • I was only looking because I saw some drops on the ground but it wasn't alot. Recently had it serviced will ask the mech to confirm. Find it strange that it looks standard though, can see in another photo of a random box 
    • So...not sure if you know if that has always been there or why you went looking. It could be old damage from a clutch explosion, or even just the gearbox got dropped somewhere along the line. Basically, you should seal it up to stop oil and dust getting into the bellhousing, but it doesn't matter too much and is not structural. I'd suggest something like a glob of JB Weld. BTW what gearbox oil are you running, I would guess the breather has been spewing it everywhere.
    • Hey Duncan thanks for your reply. Sorry mate I know the photos are shit.  Took another photo for reference. Seems the casing does have a hole in it looking on the net, fluid seeping out. Added a photo   
    • Very hard to make out what you mean, is it the squarish hole with redline shockproof (probably) under it? Is that pic from on top of the engine with the firewall to the left of pic and engine to the right? Either way, spray the area liberally with degreaser and try again, maybe circle the part you are worried about
×
×
  • Create New...